2026-827 Standards of appearance and dressDisclosure log response · North Wales Police
2026-827 Standards of appearance and dress.pdf
Read it at North Wales Police's website
- Published
- 17 Aug 2026
- Published by
- North Wales Police
- Source
- North Wales Police's website
- Recorded by PoliceFOI
- 2 Sept 2026
In full, as North Wales Police published it
We show a record in full only where its publisher's terms allow it. Most police forces in England and Wales publish under the same publication scheme terms: anyone may reproduce a force's own material free of charge if it is accurate and not misleading and the source and copyright are acknowledged, but not for any commercial purpose. PoliceFOI is published by a company, so we treat our use as commercial, and for those forces we show each record's title and summary, with a link to the original, until the force agrees to more. A few forces' terms are stricter still. None of these terms covers material owned by someone else, or a force's logo, so we link to such material rather than copy it.
Files
- File PDF, 7.4 MB
The original
The text of this file
Uned Rhyddid Gwybodaeth / Freedom of Information Unit
Pencadlys yr Heddlu,
Glan-y-Don, Bae Colwyn LL29 8AW
www.heddlugogleddcymru.police.ukPolice Headquarters,
Glan-y-Don, Colwyn Bay LL29 8AW
www.northwales.police.ukResponse Date:17/08/2026
2026/827 - Standards of appearance and dress
In response to your recent request for information regarding;
Please provide the current force policy, instruction, or guidance that sets out the
standards of appearance and dress for:1. Police officers working in plain clothes, and
2. Police staff working in non uniformed or plain clothes rolesThis includes (but is not limited to):
* Dress code or appearance standards specific to plain clothes roles
* Any section within a Uniform, Dress Code, Appearance, or Professional Standards
policy that applies to non uniformed officers or staff
* Any locally approved guidance or annexes relating to plain clothes attireIf the information is contained within a wider policy document, please provide the
relevant section(s) rather than a summary.Scope clarification (to avoid delay)
To assist, I am not requesting:
* Personal data,
* Tactical or operational detail relating to covert tactics,
* Security sensitive material (e.g. surveillance methods).Format
Please provide the information electronically (A Word document is preferred).
If the force does not hold a single standalone policy, please confirm which document(s)
contain the relevant standards and supply those.Please find attached Dress and Appearance Protocol.
THIS INFORMATION HAS BEEN PROVIDED IN RESPONSE TO A REQUEST
UNDER THE FREEDOM OF INFORMATION ACT 2000, AND IS CORRECT AS AT12/08/2026
Dress and
Appearance
Protocol
Version 26.08 - 2026
HEDDLUGOGLEDDCYMRU
NORTH WALES POLICEDress and Appearance Protocol
Uniform and Equipment Entitlement
The Personal Protective Equipment at Work Regulations
Contamination of Uniform
Wearing and Caring for your Body Armour
Wearing your Body Amour Molly System
Ordering and Replacement of
Uniform and Equipment via Supplies
Insignia
PSU Insignia
Care Instructions for your Uniform and Equipment
Police Officers Uniform and Equipment
Police Staff Uniform and Equipment
SECTION ONE
Contents
SECTION TWO
SECTION THREE
SECTION FOUR
SECTION FIVE
SECTION SIX
SECTION SEVEN
SECTION EIGHT
SECTION NINE
SECTION TEN
1
PAGE
POLICE
FRONT VIEW
BACK VIEW
Centre Line
9999
MEDIC
EGT
Dog Section
9999
Officer Collar No.
Rank Insignia
Officer Collar No.
Mutual Aid
Call-sign
WA
K9
EGT
MEDIC
5
9
12
13
15
16
17
22
23
SECTION ELEVEN AND TWELVE
26
SECTION ONE
Introduction
The public expect everyone working in
the police service to have the highest
standards of professionalism.
Police officers and members of staff
in a non-uniformed role also have a
responsibility to present a professional
image of the organisation, in line with
the College of Policing’s Code
of Ethics.
This document provides you with clear
and comprehensive guidance on your
appearance, to present a professional
image, achieve and maintain standards
while also allowing for a level of self-
expression. It has been developed by a
group including the Police Federation
of England and Wales and Unison, led
by one of the NPCC representatives at
the College of Policing’s Professional
Committee, Chief Constable Simon
Cole. This work has been supported by
the College’s Professional Committee.
Officers and staff are reminded
that uniform and equipment issued
by North Wales Police remains the
property of the Chief Constable and
should only be worn for the role
that it was issued for.
Officers and Staff should NOT:
1. Retain items of kit and equipment
or use it for purposes that it was
not originally issued for.
The only exception to this is your
Flat Cap, Bowler Hat, custodian
Helmet and Epaulettes, these can
be retained, however you will still
have a responsibility to the force
to safeguard them.
2. Utilise uniform and equipment
that has not been provided by
North Wales Police. It may not be
of a suitable standard and could
compromise safety.
The Chief Constable will not be
responsible for any loss or injury
caused or contributed to by uniform
or equipment that was not supplied or
used for the intended purpose.
Overriding Principles
Unless otherwise stated, this
guidance applies to all police officers
and members of staff who are in a
public-facing role. Deviating from
these standards without justification
may result in you facing disciplinary
proceedings.
All officers and staff - specifically
covert operations staff - should dress
appropriately for their specific job
role, unless otherwise dictated by
operational needs:
• dress in keeping with the
professional image outlined in
this guidance - clothing should
be clean and neatly pressed
• maintain high standards of
personal hygiene and
grooming
• do not wear anything which
represents a risk to health
and safety
• do not wear any items which
are likely to bring the force
into disrepute - this includes
potentially offensive badges,
logos or motifs.
Supervisors
Supervisors have the responsibility
to ensure that there is a robust and
consistent approach towards this
guidance, rather than your personal
interpretation of it. You are expected
to challenge officers and staff who do
not present a professional image of
the force in line with the guidance.
Set an example with your own high
standards of appearance. Ensure
groups of uniformed staff and
officers working together in public
view are dressed uniformly as far as
is practicable, subject to operational
commitments, religious observance /
cultural needs, medical, maternity or
health reasons.
1. General
• This protocol applies to all
personnel. It has been kept
deliberately short to provide clear
guidance whilst allowing staff the
maximum permissible freedom to
express themselves.
• All staff have a responsibility to
be well turned out at all times
while on duty. Our personal
and professional standards are
reflected in the image we portray.
We do an important job and we
must look the part - the public
expect no less.
• Supervisors are directly respon-
sible for ensuring standards are
maintained.
• Detailed information regarding
uniform and equipment
entitlements together with
relevant background information
can be found in this Dress and
Appearance Protocol.
1
Dress and Appearance Protocol
2
• Where policy or the Dress and
Appearance Protocol do not
provide specific guidance on a
particular issue the overriding
imperatives are:
• maintaining a professional
image;
• minimising risks to health
and safety.
• Every effort will be made to
provide uniform that meets the
requirements of staff in relation
to their:
• cultural heritage;
• religion;
• requirements based on other
ethical issues;
• gender identity:
Diversity
North Wales Police is committed to
ensuring that, wherever possible,
the diverse needs of all staff are
met in terms of religious and/
or cultural observance, provided
that they do not conflict with or
compromise the delivery of our
operational services and our
obligations under Health and
Safety legislation. Wherever
possible, we shall respond
sensitively to any issues or
problems relating to uniform and
equipment, and work together
with individuals to establish the
most positive and practical way to
address their requirements.
• Reasonable Adjustments:
Officers who wear a uniform but
are experiencing issues due to a
medical condition should contact
their supervisor initially to discuss
alternatives, once alternatives
have been agreed a workplace
Adjustment form must be fully
completed and submitted to
Supplies for action.
• Training:
You may wear your operational
uniform for training including any
class room based training.
2. Health and Safety
• The Health and Safety at Work Act
1974 applies to all in the police
service.
• Personal Protective Equipment
(PPE) is issued for your protection.
It will be worn or used as directed
- this is a legal requirement under
health and safety legislation.
• Detailed advice is available on the
NWP website and from the Staff
Associations.
3. Personal Appearance
• Lanyards:
To be smart and work related,
must be bilingual.
• Jewellery:
Operational staff
There is a potential health and
safety implication with wearing
jewellery. You are permitted to
wear a watch, a band ring (eg,
a wedding, civil partnership,
engagement, eternity or modest
Inappropriate hair
Appropriate hair
Inappropriate length/style/colour
Appropriate length/style/colour
Inappropriate facial hair
Appropriate facial hair
signet ring), small stud earrings
and a necklace (provided this is
worn under clothing and is not
visible).
You may wear other jewellery with
permission and on a case-by-case
basis. This could be on medical
grounds, eg, an alert bracelet, or
religious grounds, eg, Sikh staff
are permitted to carry a miniature
Kirpan out of sight beneath outer
clothing.
All other staff
You may wear jewellery but must
maintain the professional image
of the force.
Individual pieces of jewellery may
be subject to health and safety
assessment and you may be
required to remove these while
at work or carrying out tasks.
Jewellery is worn at your own
risk and forces are unlikely to be
liable for any loss, damage or
theft of such. You are therefore
encouraged not to wear valuable
jewellery to work.
Silicone Wedding Rings are
available to all staff from
Supplies.
• Tattoos:
All Staff must follow the Force
Tattoo Policy.
• Hair:
Uniformed staff
Wear your hair so that it is cut or
secured above the collar and ears
and is neat and tidy. It should not
present a health and safety hazard.
Any hair accessory must be plain
in design and black or navy blue
in colour. Extreme and vivid hair
colouring is not permitted. Do not
dye it in conspicuously unnatural
colours.
For police officers and other
operational uniformed staff,
pigtails and ponytails are
unacceptable due to officer
safety implications.
Non-uniformed staff
Ensure your appearance reflects
the same high standard required
of all other members of the
force, dependent on working
environment (if the role is not
one which requires face-to-face
contact with the public, there is
room for discretion).
• Cosmetics:
You are permitted to wear minimal
makeup appropriate to your natural
skin tone or in connection with
your religion/faith, eg, the Bindi.
You may also wear makeup to
conceal a facial disfigurement
or significant blemish.
Uniformed operational staff, for
health and safety reasons, should
keep fingernails trimmed short
and clean. You may not wear any
jewellery or attachments on the
nails. Nail polish must be clear or
of subtle colour, with the same
colour used for all nails.
• Facial Hair:
Facial hair should be neat and
tidy. Do not dye it in conspicuously
unnatural colours.
An unshaven/stubbly appearance
is unacceptable unless you are
growing a beard or moustache.
This does not apply where there
is a genuine medical reason not
to shave.
• Spectacles:
Prescriptions spectacles worn
during operational activity,
including roles that involve direct
contact with the public, must have
lenses made of safety plastic
and not glass, for health and
safety reasons. The frame should
generally be plain and neutral in
colour and style. Those members
of staff holding a force driving
authority and required to drive
as part of their role should avoid
wearing spectacles with wide arms
due to them blocking side-vision.
• Sunglasses:
Frames should be plain and neutral
in colour and style. Mirrored
reflective lenses are not permitted.
Remove your sunglasses when
talking to a member of the public
and inside a building unless it is
necessary to continue wearing
them for medical reasons or
because they are prescription
sunglasses. In such cases, consult
a supervisor. You may need to
provide supporting evidence, eg,
a medical note from the GP or a
request from occupational health.
• Ties and cravats:
Staff wearing the operational shirt
will not be required to wear a tie/
cravat. In all other cases, you
should wear a force-issue tie/
cravat, unless permission has
been given to remove this due to
weather or staff are on a meal
break away from public view.
Staff may wear a single tie slide
or pin. Designs should be discrete
and free from political bias.
3
PC and PCSO Cravats
4. Footwear
Uniformed staff
Wear plain black boots or shoes
appropriate for the role to be
performed. Footwear must be
clean, with a low, flat heel.
Socks and tights or stockings
must be of a plain colour and
appropriate to the uniform being
worn.
Non-uniformed staff
Only wear footwear that is clean,
smart and appropriate to your role
and in keeping with the standards
set for uniformed staff. Some
styles of shoe are inappropriate
in certain situations due to health
and safety considerations, eg,
high-heeled shoes and open-toe
sandals.
All staff
If there is a medical need (eg,
disability or pregnancy) for certain
types of footwear, this will be
considered on a case-by-case
basis.
5. Headgear
Headgear is an integral part of
police uniform and an important
element in enabling the public to
recognise you. It is compulsory
for uniformed staff to wear force-
issued headgear while performing
public duties. This not only
projects a professional image but,
where appropriate, assists in the
health and safety of staff.
The following also applies:
• except on religious and
medical grounds officers,
PCSOs and members of the
Special Constabulary will wear
force-issued headgear
• officers and uniformed staff in
police vehicles may remove
their headgear while in the
vehicle but must wear it
outside the vehicle at all
times unless operational
commitments prevent this,
eg, chasing suspects or saving
lives, home visits, severe
weather such as high winds
(police officers and PCSOs
riding police pedal cycles while
on duty are to wear pedal cycle
safety helmets and police
motorcyclists will wear force-
issue motorcycle helmets
when on patrol)
• you may remove headgear
when providing television
interviews to avoid shading
the eyes and when posing for
non-operational photographs
• Sikh officers and uniformed
staff may wear a black or dark
navy blue turban with a
modified cap badge
• Muslim officers and staff may
wear a black or dark navy blue
headscarf/hijab
• Sikh officers and staff who
wear turbans are exempt by
law from having to wear
motorcycle helmets and are
also therefore exempt from
having to wear pedal cycle
safety helmets while on duty
or at work, however, a risk
assessment will be undertaken
in relation to the specific role
to be performed, including any
potential communications
issues
• officers and uniformed staff
may wear prayer caps at the
appropriate time and when
the need arises while on duty
• specialist headgear such as
baseball caps and black
woollen hats may only be worn
as per the scale of issue for
the role you are undertaking,
for example, PSU staff, and
can only be worn in connection
with that role.
• PCSO:
Flat cap or bowler hat will be
worn at all times when engaged
in outside duties.
• POLICE STAFF:
No headgear issued other than PPE.
• POLICE OFFICERS:
Operational Uniform:
Flat cap or bowler hat will be
worn at all times when engaged in
outside duties other than on foot
patrol and at public events where
Helmets must be worn.
Dress Uniform:
Bowler hat or flat caps for
Inspectors and above, bowler hat
or helmets for all other officers.
• FIREARMS OFFICERS:
To wear baseball caps at all
times when engaged in outside
duties.
Ballistics helmets should be
worn when required.
• WINTER HATS:
Officers and PCSO’s who have
been issued woollen hats will
only be allowed to wear them
with authority of a supervisor
when weather conditions are
particularly poor.
4
Uniform Footwear
SECTION TWO
Each police unit has a unique job to
do, and as a result there are several
different uniform entitlements. Current
entitlements can be found in this
section.
Requests for additional items of
equipment will require the completion
of a risk assessment and Business
Case for the particular activity carried
out by the specialist unit.
All applications for additional or
new equipment once endorsed by the
appropriate Superintendent or Head
of Department must be forwarded
to the Head of Procurement for
consideration / approval by the
Uniform and Equipment Board.
Chaired by Corp HMIC Chief
Inspector.
All requests for uniform and personal
equipment must be emailed to
Procurement in order to maintain
the correct records of issue and
ensure that the correct standards
are met and maintained.
Ownership of Uniform and Equipment /
Retention / Disposal
You have a responsibility to act as
the custodian for all of the items of
uniform and equipment issued to you
throughout your career with NWP.
On leaving the force it is your personal
responsibility to return all of your
uniform and/or equipment used, or
unused. The only exception to this
is your Headwear, Flat Cap, Bowler
Hat, Helmet and Epaulets, this can be
Retained, however you will still have a
responsibility to the force to safeguard
it. Please ensure that you contact
Supplies to arrange a date and time so
that you can return your uniform and/
or equipment in person.
The return of uniform and/or
equipment can be actioned prior to
leaving or up to 2 weeks after your last
day in work or shift. Supplies can be
contacted on supplies@northwales.
police.uk
Supplies will take receipt of all
uniform and/or equipment and where
appropriate it will be re-cycled or
disposed of in the appropriate manner
eliminating any security risks to North
Wales Police.
Alteration / Modification
Alterations to tailoring will be
arranged by Supplies. Garments which
have been worn must be cleaned
before being submitted for tailoring
alterations.
Unauthorised alteration or modification
of any uniform or equipment is not
permitted.
Replacement
The routine replacement of certain
uniform items is no longer arranged on
an annual basis. Items are replaced on
condemnation.
Defects
Problems with ill-fitting or defective
uniform should be referred to Supplies
at the earliest possible opportunity.
Loss or Damage
Applications for the issue of
replacements of lost or damaged
uniform should be made to Supplies
and must be supported by a
supervisory officer.
Serial Numbered Items
Serial Numbered Items IE Batons,
Handcuffs, Body amour, Warrant Card
Holder etc, must be accounted for at
all times, replacement items will only
be made upon the return of the old
items or written authorisation from an
officer of Inspector rank or above.
Medals and Decorations
Personnel on duty in dress uniform
may wear medal ribbons to which
they are entitled. Medals and other
decorations will not be worn unless
instructions to the contrary are issued
in regard to any special event.
Medal ribbons can be fitted at
Supplies, Headquarters, when
necessary, and if alternative fitting
arrangements are to be made, they
can arrange for advice to be given
upon precedence, and location, of
riband fixings.
You may wear medals and ribbon
brooch bars on tunics for special
events. The medal ribbon brooch bars
may be worn on fleeces. Position
medal ribbons just above the left
breast pocket flap of the tunic, centred
over the pocket button, in order of
importance from right to left, ie, the
Queen’s Golden Jubilee medal first,
followed by the Diamond Jubilee and
then the Police Long Service and Good
Conduct medal. The General Service
Medal and other military medals
should precede the jubilee medals.
Retain police medals of any
description issued/awarded to you at
all times while you remain in service to
ensure that you are able to comply with
any force requirement to wear medals
at relevant events and occasions. For
that reason, do not sell police medals
or otherwise dispose of them while in
service.
5
Uniform and Equipment EntitlementRibbons with a Military Medal
Ribbons with a KPM (QPM)
Advice for Medal and
Medal Ribbons Order of Wear
The correct order and wear of medals
and medal ribbons are subject to
specific direction from the sovereign.
Many officers start their police service
with medals following military service
but equally police officers and staff,
due to the nature of the dangerous and
valuable work conducted in the service
of the crown are very often awarded
decorations from His Majesty.
The following is the correct order and
wear for the most typical awards that
Police may be presented with during
their service or already own.
Worn from left to right (the left being
“your left” when looking at the person)
Ribbons are worn sewn directly
onto the dress service uniform above
the left breast pocket and or at the
equivalent height on uniforms without
breast pockets.
Medals are then worn pinned above
these ribbons in effect covering them.
These can be worn in the correct order
individually, however persons may wish
to have their medals mounted on a
single pin bar (swing mounted) or fully
mounted against a hard backing and
pin bar (court mounted) This can aid in
uniform presentation.
Ribbon and Medal Order of Wear
Military orders and crown decorations:
• These have a specific order
depending on the medal with the
Victoria Cross always first and
advice can be found on the London
Gazette website, For example the
CBE will come before MBE and
before any other decorations for
bravery such as a Military Cross or
the Kings Police Medal (was QPM)
Followed by:
Military Campaign Medals
• Such as the Iraq Medal,
Operational Service Medal
(Afghanistan), General Service
Medal or Gulf War Medal.
• These are to be worn in the order
issued, other than UN and NATO
medals which are worn after
British medals but still in the order
awarded to the wearer.
Followed by:
Commemoration Medals
Such as Golden, Diamond and Platinum
Jubilee Medals as well as any Crown
coronation medals. All worth in the
order of presentation.
Then any:
• Meritorious Service Medals
• Accumulated Service Medals
• Long Service Medals (Worn in date
issued order)
Warrant Cards and Identity Cards
Whilst on duty, all personnel must
carry warrant cards or identity cards.
Additionally, police officers must
carry warrant cards whilst off duty
in any place where the officer has
jurisdictions.
The loss of a warrant card or identity
card must be reported immediately
such a loss is discovered. Suspended
personnel will be required to surrender
warrant or identity cards upon demand.
Carry your warrant/identification at all
times. At times of increased security,
wear it outside clothing in a prominent
place, usually in a lanyard or a name
badge holder, at all times while on
police premises.
Report the loss or theft of a card to
a line manager immediately due to
security implications.
When visiting certain countries on
vacation, seek guidance in relation to
the current threat levels and whether
you should take your warrant /
identification card.
Inland Revenue -
Guidance to Officers
Police officers are currently entitled to
a flat rate allowance granted through
their tax code. This allowance covers
all costs incurred in the upkeep of
a police uniform. The allowance
is granted for items which are not
provided by the employer, for example:
• dry cleaning and washing
garments, including body
armour; and
• purchase of tights and socks.
The amount has been agreed at
national level between the Police
Federation and the Inland Revenue
Head Office. No additional amounts
of relief are available regardless of
the circumstances.
Welsh Language Badge
All staff are encouraged to wear their
Welsh Language Badge, be it the
Bilingual or Learner Badge.
Tie Pins
Officers and staff are
permitted to wear one
appropriate tie pin (on tie
or cravats only) in addition
to the Welsh Language Badge.
General
Uniform Dress Code
Keep all items of uniform clean and in
good repair. It is your responsibility to
ensure lost/damaged items of uniform
are replaced. Unless permitted to
wear plain or alternative clothes, eg,
on account of an officer’s pregnancy
or disability, uniformed staff will wear
uniform at all times when on duty
or at work.
Only wear police-issue items of
equipment on the uniform belt. Wear
utility belts over the trousers or skirt
and fleece, blouson or high-visibility
jacket for health and safety reasons
and to ensure uniformity.
6
Bilingual Badge
Learner Badge
Do not wear large bunches of keys
hanging from the belt to avoid risk of
injury, unless there is an operational
requirement (eg, custody). Insignia/
epaulettes of rank or post must be
worn and visible at all times.
Officers and staff in specialist
departments may wear issue coveralls
and polo shirts or dark blue shirts,
as per the scale of issue, at their
discretion, however, keep such
clothing clean and tidy.
Do not to wear uniform when
appearing on social media or internet
sites in an off-duty situation or in any
other off-duty capacity without prior
authority of a manager.
You may wear charity badges/patches
with permission. They must not be too
large and must not be in place of or
obscure official police insignia.
Non-uniform Dress Code
Individuals wearing plain clothes for
their role should ensure that their
standard of dress and appearance
reflects the same high standard
required of uniform staff.
You must have your ID card on display
while on police premises (remove
visible identification when away from
police premises) and consider the
appropriateness of the lanyard.
Dress in business wear which is
smart and clean. Business suits or
an appropriate smart jacket are the
expected forms of dress whenever you
are representing the force at events,
at court or in contact with the public
through your role.
Individuals engaged in covert
operations where their identity must
be concealed may dress to suit the
circumstances.
Police Officers (including
Special Constables)
Police officers (including Special
Constables) uniform is divided into
two sections Operational and Dress
(Ceremonial) Uniform. Each set of
uniform will consist of the following:
Operational Uniform
• Trousers - Operational
• Equipment Belt
• Operational Top -
Long or Short Sleeved
• Micro Fleece
• High Visibility Jacket
EN ISO 20471 Class 3
• Body Armour
• Flat Cap and Bowler Hat (helmet
for foot patrol and at public
events)
• Safety Boots (PPE)
• PPE as appropriate, i.e. batons,
cuff and spray
Dress (Ceremonial) Uniform
• Trousers - Uniform
• Jacket (Tunic)
• White Shirts - Long or
Short Sleeved
• Ties and/or Cravats
• Embroidered Epaulettes
• Helmet
• Bowler Hat
• Flat Cap - Inspector and above
• Skirt
If wearing a skirt, professional plain
black shoes and tights should be
worn.
NB: metal numbers are not to be worn
as they are considered to have Health
and Safety implications.
You should wear your Operational
Uniform when:
• you are carrying out operational
duties;
• working in an office environment.
• you should wear your Helmet when
on foot patrol and at public events;
• an operational order for a specific
event directs you to do so.
You should wear your Dress Uniform
when:
• you are at an attestation or an
award ceremony;
• attending a promotion board,
inspection or interview;
• an operational order for a specific
event directs you to do so;
• attending a service funeral;
• attending a misconduct hearing;
• other formal occasions;
• working in an office environment.
Community Support Officers (PSCO)
Community Support Officers (PSCO)
uniform will consist of the following
and should be worn at all times.
Uniform comprises the following
garments:
Operational Uniform
• Trousers - Operational
• Equipment Belt
• Operational Top -
Long or Short Sleeved
• Micro Fleece
• High Visibility Jacket
EN ISO 20471 Class 3
• Body Armour
• Safety Boots (PPE)
• PPE as appropriate
• Bowler Hat / Flat Cap
Police Staff Uniform
Police Staff Uniform will only be issued
if the request falls under one of the
following two categories and has the
approval of the appropriate Command
Team and Clothing, Equipment and
Services Committee. Once you have
been issued with a uniform you must
wear it all times. Footwear should be
black (if you’re not issued with Safety
Boots).
PPE: Because of the need for Personal
Protective Equipment
(PPE) Public Facing: to those staff who
come into contact with members of the
Public on a frequent basis.
Police Staff Uniform comprises the
following garments:
• Operational Top or White Shirt
• Trousers - Operational or Uniform
• Micro Fleece
• Body Armour
(Detention Officers only)
7
• PPE as appropriate
Police Officers / Staff
not issued with uniform
• Staff must be smart, businesslike
and practical
• Staff must not wear jeans, T-shirts
or trainers unless approved by line
managers.
• Staff must not wear shorts and flip-
flops or Crocs unless approved by
line managers.
• Staff must wear ID cards and name
badges where possible.
Diversity
North Wales Police is committed to
ensuring that, wherever possible, the
diverse needs of all staff are met in
terms of religious and/or cultural
observance, provided that they do
not conflict with or compromise the
delivery of our operational services
and our obligations under Health and
Safety legislation. Wherever possible,
we shall respond sensitively to any
issues or problems relating to uniform
and equipment, and work together
with individuals to establish the most
positive and practical way to address
their requirements.
Uniform Staff - Police Officer,
Police Community Support
Officers and Police Staff
Unless otherwise indicated, the
following points relate to North Wales
Police Officers, Police Community
Support Officers and Police Staff in
uniform.
a) Only authorised items of uniform
and equipment may be worn/used.
b) Uniform may not be altered other
than by or with the permission of
the Head of Procurement.
c) Uniform which becomes ill-fitting
or shows signs of wear and tear
should be exchanged.
d) Where non standard items of
uniform are authorised and issued
for a particular duty or specialist
role, the items may not as a matter
of course be worn for other duties,
nor as a substitute for standard
uniform.
e) Because of Health and Safety
requirements, high visibility
jackets and lightweight high
visibility jackets are compulsory
when dealing with traffic or similar
situations (e.g. on or in the
vicinity of road accidents) or
where a risk assessment also
dictates. Officers using police
vehicles must ensure they have
one or other of these jackets
available to wear. High profile
(yellow) blousons and body
armour are not acceptable for
the above duties as they do
not provide the required high
visibility requirements set down by
legislation.
f) Specialist clothing should be worn
as intended.
g) All outer garments must show
the correct authorised
identification by insignia (fixed or
by use of appropriate epaulettes),
as per section 8 of this document.
h) Officers and staff not in uniform
must wear their identity cards
when in police premises. Officers
and staff are also to wear an
official Force name badge where
possible.
i) When wearing a tunic, Officers
must wear a tie or a cravat
j ) Headgear is to be worn at all
times when performing uniform
duties outside, unless in a vehicle
or otherwise prevented by the
urgency or nature of the particular
duty. All officers must wear bowler
hat/flat cap/helmet/baseball caps
as described in this document
k) Force issue approved footwear
must be worn for all policing
purposes other than for specialist
purposes (motorcyclists for
example) for which alternative
footwear will also be issued.
Force issue approved footwear
must be worn by PCSO and Police
Staff at all times.
l) Details on the wearing of medals/
ribbons/decorations and orders
are included in Section 10.
Court
If you normally wear Operational
Uniform, you should wear it when you
attend a Crown Court, Magistrates’
Court, Coroners’ Court, Civil Court or
Employment Tribunal to give evidence.
This includes your utility belt, baton,
rigid handcuffs and Parva spray. This
will make sure you are able to deal with
an incident at court or on your way to
or from it. Officers do have the option
to wear Dress Uniform if appropriate.
Officers who would not normally wear
Operational Uniform should wear their
Dress Uniform.
Tasers
As of 16th November 2020 the Lord
Chief Justice has amended the
Criminal Practice Direction to allow
officers to be able to carry Taser
in court as part of their operational
equipment when attending court
on routine business, such as giving
evidence or delivering exhibits
Captor Spray
Uniformed Officers are allowed to take
their Captor Spray into Court as this
forms part of their PPE.
Officers in uniform should not be
subject to search when attending
court, although may be asked to
show their Warrant Card.
Officers not in uniform will not be
allowed to take Captor Spray into
Court.
If there are any issues with the carrying
of Captor Spray, refer security/ushers
to the HMCTS Wales Head of Crime
directions.
Promotion Board, Inspections
and Interviews
You should wear your Dress Uniform
for a promotional board, inspection or
interview.
It is permissible for Detectives to
attend in a Suit.
All staff have a responsibility to adhere
to the protocol - as a last resort, non
compliance can be referred to the
respective disciplinary procedures
for police officers and police staff.
8
SECTION THREE
9
These regulations require NWP to
provide suitable personal protective
equipment (PPE) to any member of
staff who may be exposed to risks to
their Health and Safety whilst at work.
The Personal Protective Equipment at
Work Regulations 1992 are amended
so that where there is an inevitable
conflict between the exercise of police
powers and NWP’s duty to ensure that
suitable PPE is provided to employees,
the duty shall be complied with so far as
is reasonably practicable.
However, you should remember that
PPE is a last resort and should only
be provided where the risk cannot be
controlled adequately by other means
which are equally or more effective.
All PPE must be inspected annually, and
recorded using the annual inspection
sheet in your training manual.
1. Examples of PPE in
operational police work
• Riot helmets and coveralls
for police officers involved in
policing public order
situations;
• Body armour;
• High Visibility Jackets;
• Heavy Duty Gloves for
searching a particularly
hazardous location;
• Safety Boots;
• Public Order Equipment.
2. Advice and Contacts
• Health & Safety
Ext 88715
• Supplies ext. 04209
[removed by PoliceFOI])
3. Selection of PPE
To decide whether PPE is
required, and in what form, the key
requirements to consider within
the regulations include the
following:
Risk Assessment
• You have to choose PPE on
the basis of an assessment of
the nature of the risks to which
NWP staff may be exposed.
• You should undertake a risk
assessment. This would
include such records as
identifying the maintenance
of PPE and also provision for
accommodation, storage and
the expected shelf-life of
the particular item.
4. Maintenance of PPE
PPE provided to staff must be
maintained in an efficient state,
efficient working order, and in
good repair. Spare parts must be
readily available. Items should
be checked before and after
use, as well as a detailed annual
inspection.
5. Information
NWP managers must provide
all staff using PPE with relevant
information, instruction and
training. The information must
include:
• the risks which the PPE is
designed to avoid or limit;
• the manner in which the PPE
works and how it should be
used;
• any action that staff should
take to keep the PPE in good
repair;
• an appropriate system for
replacement, in accordance
with the shelf-life.
6. Use of PPE - duties
of employees
All NWP employees have a duty to:
• use PPE in accordance with
training and instruction;
• return it to the appropriate
storage area after use;
• report any loss or obvious
defect with the PPE to their line
manager;
• understand the risks identified
and the risks that could have
been avoided by other means;
• identify the definition of the
characteristics needed in the
PPE in order to be effective, for
example is the glove to protect
against a corrosive chemical or
blood or body fluid; and
• monitor the shelf-life and
ensure appropriate
replacement.
7. Suitability
To be suitable PPE needs to:
• be appropriate to the risks and
workplace conditions;
• take account of ergonomic
considerations and the state
of the health of the person
wearing PPE;
• be capable of fitting the wearer
correctly and comfortably if
worn for long periods;
• be effective in preventing or
adequately controlling the risks
involved without increasing the
overall risks, so far as is
practicable, and
• comply with the relevant
British and European standards
and carry the CE mark where
eligible.
8. Compatibility
Where staff are required to wear
more than one type of PPE, the
items must be compatible and
effective. For example, where
respirators, goggles and safety
helmets are worn at the same
time, the items must not interfere
with the seal of the respirator
face piece.
The Personal Protective Equipment at Work Regulations
10
9. Review
The risk assessment must be
reviewed when there is a reason
to suspect it is no longer valid,
or, following significant changes,
to ensure that any appropriate
changes required are made.
10. Equipment excluded
from the regulations:
• ordinary working clothes
and uniform which do not
specifically protect the Health
and Safety of the wearer.
(However, if staff are required
to work in inclement weather
the appropriate PPE is
required);
• equipment used by the police
for arrest, restraint, self-
defence or as deterrent
equipment;
• portable devices for detecting
and signalling risks and
nuisances for example gas
detectors and radiation
dosimeters;
• PPE used for protection while
travelling on the road, such
as crash helmets and leathers;
• equipment used during the
playing of competitive sports,
for example footballer’s shin
guards; and
• where existing regulations
already apply and require PPE
to be supplied, such as lead,
pionising radiation, asbestos,
hazardous substances subject
to COSH, noise and safety
helmets on construction sites.
11. Further Guidance
Should you require any further
details in relation to any aspect
of PPE, or assistance with the
preparation of a risk assessment,
please contact the Health and
Safety Manager on extension
88715.
Items of PPE issued
1. High Visibility Jackets
All sizes comply with EN 471
Class 3 and can be worn for traffic
duties.
When undertaking any activity
that involves stepping out onto
the carriageway, officers should
always wear a high visibility jacket
that complies with EN 471, Class 3.
An operational order may require
you to wear one for other reasons,
for example a major incident
involving the closure of a railway
line.
To ensure appropriate levels of
conspicuousness and safety, high
visibility jackets should always be
fastened.
2. Body Armour
Body Armour must be worn at all
times when on operational duties.
See Section 3 for details.
3. Personal Pr otection Kit
Issued to protect from blood and
other body fluids in an emergency.
4. Glo ves
Cut Resistance - EN388
Tests resistance to abrasion,
cut, tear, puncture and impact
protection gloves
This standard determines a glove’s
performance against physical
hazards when handling rough or
sharp objects, such as thin metal
sheet, glass or masonry blocks.
EN 388 includes a series of up to
six separate tests which measure
gloves’ level of resistance to:
Abrasion (1 to 4)
cutting, (1 to 5)
tearing, (1 to 4)
puncture (1 to 4)
impact. (P)
Leather Gloves to Cut Level 5
Cut Protection Gloves to Abrasion
Level 4
Mechanical Hazards - EN388
This standard determines a glove’s
performance against physical
hazards when handling rough or
sharp objects, such as thin metal
sheet, glass or masonry blocks
EN 388 includes a series of up to
six separate tests which measure
gloves’ level of resistance to:
Abrasion (1 to 4)
cutting, (1 to 5)
tearing, (1 to 4)
puncture (1 to 4)
impact. (P)
Rigger Gloves
Chemical and Micro-Organisms
Resistant - EN374
This standard evaluates a glove’s
ability to protect against both
dangerous chemicals and micro-
organisms.
EN 374 - 1: Protective Gloves
Against Chemicals and Micro-
Organisms
EN 374 - 2: Determination to
Resistance to Penetration
EN 374 - 3: Determination of
Resistance to Permeation by
Chemicals (replaced by EN 16523)
EN 374 - 4: Determination of
Resistance to Degradation by
Chemicals
EN 374 - 5: Terminology and
Performance Requirements for
Micro-Organism Risks
Cold Resistant - BS EN 511:2006
This applies to any gloves intended
to protect the hands against cold
environments down to - 50 °C. It
measures the gloves’ resistance
to three different types of cold
hazard.
11
Heat Resistance -
EN407BS EN 407:2020
Protective gloves and other hand
protective equipments against
thermal risks (heat and/or fire)
407:2004 - Protection from
Thermal Hazards (Heat and/or
Fire) now also covers 2020
This standard measures the
protection gloves provide against
different types of thermal hazards,
and so their ability to reduce
workers risk of sustaining burn
injuries. To be EN 407 certified,
gloves also need to provide
low level protection against
abrasion and tear - as tested in EN
388:2016.
Gloves’ behaviour when in contact
with a flame is used to determine
their flammability
Contact heat resistance assesses
how hot an item can be without the
wearer feeling pain when holding
it, by measuring the temperature
inside the glove
Convective heat resistance is
assessed based on how long
gloves delay the transfer of heat
from a flame
Radiant heat resistance is also
based on the time gloves can
prevent heat, but from a radiant
heat source
Resistance to small splashes
of molten metal is assessed by
measuring the number needed to
heat up the glove
Resistance to large splashes of
molten metal is measured by the
weight of metal which damages
simulated skin behind the glove.
Protective gloves for
welders - EN 12477
Gloves which have achieved
specific scores in EN 407 and
EN 388 standard tests can
be recommended for welding
applications. They are graded as
providing either Class A or Class B
protection.
Type A gloves offer more
protection and are intended for
more general welding processes
Type B gloves are more suited to
welding operations that need good
dexterity
Materials and articles in contact
with foodstuffs - BS EN 1186
Plastic items which are intended to
come into contact with food should
not transfer substances which
could either endanger human
health or cause unacceptable
changes in the food. Therefore,
only gloves that are food contact
approved should be used when
handling food.
5. F ootwear
Force issue approved footwear
must be worn for all policing
purposes other than for specialist
purposes (motorcyclists for
example) for which alternative
footwear will also be issued.
When uniform is issued but no
footwear, officers and staff must
wear plain black work boots /
shoes (closed toe).
6. Public Order Equipment
Force issue approved Public
Order Equipment must be worn
as directed by your supervisor
or an appropriate risk
assessment. Body armour and
guards must be worn under your
suits at all times as these products
are not flame retardant.
7. Cycle Helmet and Long Hair
To safely and comfortably wear a
bicycle helmet with long hair, tie
your hair at the nape of your neck
or higher. Position your hair below
the helmet shell—never inside it—
and pass it through the retention
dial opening. Make sure your
helmet still fits snugly, sitting just
two fingers above your eyebrows.
Style Your Hair Low
Never wear a high ponytail or a
bulky top knot under a cycling
helmet, as it pushes the helmet out
of position, leaving your forehead
exposed, and can cause painful
pressure points. Instead, try one of
these helmet-friendly options:
Low Ponytail or Braid: Secure your
hair at the nape of your neck and
let it hang down your back or tuck
it inside your jersey to prevent
tangles.
Low Twisted Bun: Gather your hair
at the base of your skull and twist
it into a flat, low bun.
Two Low Braids (Dutch or French):
This is the most aerodynamic
and tangle-free option for longer,
thicker hair.
SECTION FOUR
12
Treatment of
Contaminated Clothing:
Contaminated Clothing can be
Laundered in accordance with HSE
guidance, The process of laundering
contaminated clothing requires
treatment that is effectively a wash-
based disinfection process, and is
required to avoid cross infection from
re-used items.
The nature of laundry soiling depends
on the source, and at the most
extreme levels, is likely to include
blood, wound exudates, sputum,
saliva, sweat and urine, as well as
vomit and faeces. It is also important
to recognise that bloodstained body
wastes such as urine may also serve
as a potential source of infection. The
nature of the soiling will determine
how contaminated items are sorted
and processed, and current UK
categorisation recommends sorting
into:
• Used clothing (soiled and foul),
• Infected clothing and
• Heat labile clothing categories.
Contaminated clothing should not
be stored, other than double bagged
in yellow clinical waste bags, they
should be sealed and labelled.
Infected clothing is defined as clothing
derived from known infectious
patients, including those with HIV,
hepatitis B, C and other infectious
agents. Clothing can be made safe by
washing to remove any contaminating
body fluids, but it is often not practical
to wash domestic Clothing at high
temperatures because of the heat
lability of fabrics. Recommended wash
conditions, based on the levels of
soiling, are as follows:
Contamination of Uniform
Recommended treatments to ensure
cleaning and disinfection of used
(soiled and foul) clothing.
• A 65 degree Celsius temp erature
hold for a minimum of 10 minutes
within the wash cycle; or
• 71 degrees Celsius for not less
than 3 minutes.
• Mixing time must be allow ed
to ensure heat penetration and
assured disinfection.
• Recommen ded treatment to
ensure disinfection of infected
Clothing (mainly applicable to the
healthcare setting):
• Storage of infected Cloth ing must
be done in a secured area, prior to
washing.
• The same wash temperat ure
profile as used for used (soiled
and foul) Clothing is thought
sufficient to inactivate HIV, but
the evidence is less certain
for hepatitis B. The wash
temperature, coupled with the
dilution factor, should render
Clothing safe to handle on cycle
completion.
Recommended treatment to ensure
disinfection of heat labile clothing
• These item s need to be washed
at ~40 degree Celsius so the
wash temperature is insufficient
to disinfect, and chemical
alternatives are required;
• Addition of hypochlorite m ay
be possible, but efficacy may
be reduced by the presence of
soiling, detergents and alkalis in
the main wash;
• Dis infection with hypochlorite is
only reliable if the Clothing can
tolerate its addition and if sodium
hypochlorite is added during the
penultimate rinse of the cycle;
• A final concentration of 1 50
ppm available chlorine must be
achieved for a minimum of 5
minutes exposure time.
Disposal of contaminated clothing
If the items are contaminated beyond
washing, then clothing you should be:
1. Remove as soon as possible.
2. Double bagged in yellow c linical
waste bags, sealed and label it.
3. Dis posal should be treated as
clinical waste.
4. Do not put in general waste bins.
Fur ther details can be obtained
from the Occupational Health Unit
on [removed by PoliceFOI] or the Health &
Safety Unit on [removed by PoliceFOI].
Always remember to wash your hands
after handling contaminated items.
13
SECTION FIVE
• These guidelines have been
produced to assist you whilst
wearing and caring for your Body
Armour.
• They are intended to raise your
awareness in relation to safety,
hygiene and storage.
• You should be aware that the
wearing of Body Armour will not
make you invulnerable to attack. It
is designed to provide protection
against unknown threats. If a
threat is perceived, get advice
from Specialist Officers.
• Force policy is mandatory
wearing of body armour when on
operational duties.
• Under Health and Safety
legislation, Officers have a duty
to wear protective clothing and
equipment, which has been
provided for their safety. It is
essential therefore that your body
armour fits you correctly. If you are
in doubt please contact Supplies
on ext. 04209 or Health and Safety
on ext. 88715.
• The armour has a level of
protection against ballistic threat
(HO1) and protection against
stabbing/slashing (KR1) attacks
as well as some blunt trauma
protection.
• Please do not enter any situation
which you would not have done
had you not been wearing the
armour and do not allow others
to pressure you into taking any
action because of perceived extra
protection.
• It is the responsibility of the
wearer/authority to carry out
a risk assessment and to be
satisfied that the protection level
provided by the armour meets their
requirement.
Caring for your Armour
• You are responsible for looking
after your armour; do not allow
others to wear it. Store it lying flat
or hang it up on a hanger.
• Keep it in a cool dry environment
out of direct sunlight.
• Covers should be taken off
regularly and washed.
• Always close Velcro fastening prior
to washing.
• Always remember to replace the
armour as per the manufacturers
instructions with relevant parts
inserted in the correct way. Failure
to do this could result in the
protection levels being reduced.
• In the event of the panels
becoming wet, do not dry Ballistic
/ Stab panels in sunlight or close
to direct sources of heat. Ballistic
/ Stab panels should be dried
indoors.
• Ballistic / Stab panels are not to
be exposed directly to UV radiation
(i.e. sunlight). When the Ballistic /
Stab panels are in the covers, the
garment is to be zipped closed and
laid flat, stood up or hung up. The
Ballistic / Stab panels are not to be
twisted or bent excessively.
Care Instructions for Carrier
• Remove all protective panels from
the carrier before laundering.
• Ensure that Velcro fasteners/zips
are in a closed position prior to
washing.
• Automatic machine wash, see
wash instructions on the carrier
label.
• Product can be washed at up to
50ºC. Use standard household
detergents in accordance with the
manufacturer’s instructions.
Wearing and Caring for your Body Armour
• Armour can be worn over your
shirt, microfleece or coveralls in
the covers provided, but must be
worn under your High Vision jacket,
waterproof coats and retardant
coveralls and high visibility
jackets.
• To provide the certified protection
it is CRITICAL that the Body
Armour is the correct size and
fitted correctly.
• If cared for correctly, the armour
is designed to protect you for 10
years.
Donning and Doffing
• To don the vest, open the Storm
Flap and centre front zip.
• Don the vest and centre the front
armour panel across the chest,
ensuring it is level at the waist
area.
• Fasten Velcro straps across the
front panel to give a snug fit,
ensuring that the armour panels
overlap at equal distance at each
side.
• Do not over stretch the elastic as
this will cause discomfort when
bending or sitting.
• The bottom of the front panel
should be no more than
approximately 1” – 1.5” (25-37mm)
above the belt line.
• When in a sitting position the body
armour should not “ride up” under
the chin.
• Zip up the outer cover and fasten
the front Storm Flap closure.
• To doff the vest, open the Storm
Flap and centre front zip. Open
one side of the elastic straps and
remove the vest.
14
• Do not use bleach or dry clean.
• Do not tumble dry.
• Do not bleach.
• Covers should be line dried.
• Carrier must be completely dry
before inserting panels or inserts.
It is the responsibility of the wearer
to adhere to the above conditions to
ensure longevity of the carrier.
Care Instructions for
Protective Panels
• Wipe over by hand using a soft
sponge or cloth and a mild
detergent with warm water.
• Do not immerse panel in water.
• Do not use bleach or starch.
• Do not machine wash.
• Do not dry clean.
• Do not line or tumble dry.
• Panels must not be exposed to
direct sunlight.
• Panels MUST be stored flat or hung
up.
• Keep away from heat, e.g. heating
pipes, radiators etc.
• It is CRITICAL that the armour
panels are assembled into the
carrier with the label BODY SIDE.
• To provide the full level of
protection provided by this
garment ALL PANELS must be
fitted into the carrier.
It is important that the armour panels
are checked when removed from the
cover to ensure no damage to the
armour protective envelope.
Inspection Procedure
On every occasion when the panels
are removed from the covers they
must be checked for any mechanical
damage. If detected this should be
reported immediately to the relevant
authorities, the armour panel be
removed from service and returned to
the manufacturer for repair. Failure to
do so will invalidate the Warranty and
Product liability Insurance
• Armour panels and carrier should
be fully inspected annually, as a
minimum.
• Details of the inspection must be
recorded to form a product service
history.
• The annual inspection shall
include checking the integrity of
the peripheral seal of the armour
protective envelopes.
• In the event of any damage
being found, the armour must be
removed from service and returned
to the manufacturer for repair. Any
attempt to carry out unauthorised
in-house repairs will invalidate
the warranty and product liability
insurance.
If damage is noted, the panels should
be returned to Supplies for further
inspection and repair.
Does my armour fit correctly?
Position of the front:
• Top of the armour should sit on the
collarbone.
• Bottom of armour should be
no more than 1 - 11/2 inch gap
between armour and trouser waist.
• You should be able to sit down
without the armour sticking in the
stomach or the top of your legs or
choking you.
Position of the back:
• Armour should fit comfortably on
the shoulders.
• Bottom of armour should have
no more than 1 - 11/2 inch gap
between armour and trouser waist.
Side Opening:
• There should be a minimum 1”
overlap at the side of your armour
where the front and back panels
meet.
Additional information can be found
on the force intranet.
SECTION SIX
15
Please note that the clips on the upper
part of your vest are for the carrying
of the Radio and/or Body Worn
Camera only and must not under any
circumstances be used to carry your
Parva Spray.
General Description
The vest has been designed with
interchangeable pockets which can
attach to any of the bays on the front
of the vest, so the user can position
them in the most appropriate way for
their own particular requirements.
Underneath the flap on the main zip
is a zip fastening pocket for gloves /
notepad etc.
On the outside of the flap on the
main zip are loops for pens and
mini mag-lites.
Inside the vest is a pocket containing
a back support. This can be
repositioned within the pocket for
comfort or removed if not required.
Positioning the Pockets
The pockets are fitted with one-way
press studs to prevent them being
removed during a struggle. If the top
edge of a pocket is ripped downwards
the top two studs will unfasten but
the bottom ones will remain in place
and vice versa if the bottom edge of a
pocket is ripped upwards.
To remove a pocket
Pull the top edge of the pocket backing
plate downwards until the top two
studs disengage. Then pull the bottom
edge of the backing plate upwards
until the bottom two studs disengage.
The pocket can then be pulled from the
Velcro backing.
To attach a pocket
Align the bottom edge of the top two
press-studs on the pouch with the
bottom edge of the top two studs on
the required bay on the vest. Roll the
studs upwards so they click into place.
Align the top edge of the bottom two
press studs on the pouch with the top
edge of the bottom two studs on the
vest. Roll the studs downwards so they
click into place. Straighten the pouch
on its Velcro backing.
Contents should be removed from
pockets before attaching or removing.
Donning the Vest
On first wearing the vest:
• Open the main zip.
• Unfasten the elasticated waist
strap on the inside back of the
vest.
• If the back support is not required
it should be removed from its
pocket on the inside back of the
vest.
• Put on the vest and fasten the
elasticated waist strap in front
of the body.
• Fasten the main zip and adjust
the vest for size using the Velcro
panels at the sides and shoulders.
• Once the vest has been adjusted
for size the back support (if
required) can be repositioned
within its pocket for comfort and
the epaulettes can be aligned
correctly after attaching your
collar number (if applicable).
Wearing your Body Amour Molly System
16
SECTION SEVEN
Supplies is based on the ground floor
of Force HQ and currently provides:
• Uniform
• Equipment - Traffic,
Airwaves anciles
• NWP Force Forms only
(Not Stationery)
• First Aid equipment
• PPE
Items such as light bulbs should be
applied for via the facilities Help desk
The Staff
Supplies can be contacted using
the group email address Supplies:
[removed by PoliceFOI]
If you need to visit the team please
book ahead; this ensures someone will
be available to attend to you.
Should you drop into the department,
please be mindful at busy times there
maybe a wait to be seen.
Appointments can be made via
(click here)
Replacement / New Items
If you require any item of equipment to
be replaced or a new item issued, there
are two possible ways of achieving
this:
• By using the Online Ordering
System
Items should be ordered via the
Online Ordering System (accessed
under Business Tools on
Forcebook).
Prior to ordering you must have
obtained authorisation from your
supervisor for the items you
require. After submission your
order will be vetted by Supplies and
if approved it will be picked and
dispatched as soon as possible.
Times will vary depending on the
stock availability and the logistics
delivery schedule.
• In Person
Visits to Supplies can only be
made by prior appointment,
therefore, please make an
appointment prior to visiting.
Exchanges
If an item does not fit you and you
require it to be exchanged, it must
be returned to Supplies within 7
days of issue, the replacement item
will be provided on the return of the
original item. You can either make
an appointment to do this, or return it
via the internal postal system, please
provide your name, collar number, work
location and what you expect Supplies
to action for you.
Alterations
Where necessary, the tailoress
can alter your uniform. Under no
circumstances must you alter your
uniform yourself.
Ordering & Replacement of Uniform & Equipment via SuppliesAssistant Chief Constable
Chief Constable
Deputy Chief Constable
Chief Superintendent, Superintendent
and Special Chief Officer
Chief Inspector, Inspector,
Special Chief Inspector and Special Inspector
Traffic Officer
Police Community Support Officer - PCSO
SECTION EIGHT
17
All uniform will be issued with appropriate badges and insignia in accordance with current regulations and local agreements.
Application for special issues of uniform should be made to the Clothing, Equipment and Services Committee and must be
supported by a supervisory officer.
Insignia
OFFICER HEADGEAR
Sergeant and Special Sergeant
Constable and Special Constable
Police Staff Volunteers - PSV18
POLICE CONSTABLE
HEDDLU
POLICE
HEDDLU
POLICE
DYSGU
CYMRAEG
SIARAD
CYMRAEG
HEDDLU
POLICE
Hook Velcro Welsh Language Badges:
Hook Velcro Back and Front Badges: Epaulettes and Sliders:
Reflective Hook Velcro Back and Front Badges:
9999
Sergeant Inspector Chief Inspector
9999
Constable
TÎM TROSEDDAU CEFN
GWLAD YR HEDDLU
POLICE RURAL
CRIME TEAM
9999
Sergeant
Chief
Superintendent
Inspector
Assistant Chief
Constable
Chief Inspector
Deputy Chief
Constable
Chief
Constable
9999
Constable
NEGODWR
ARGYFWNG GWYSTL
HOSTAGE CRISIS
NEGOTIATOR
Sergeant Inspector Chief InspectorConstable
HEDDLU
POLICE
WA 9999
K9
HEDDLU
POLICE
WA 9999
K9
HEDDLU
POLICE
WA 9999
K9
HEDDLU
POLICE
WA 9999
K9
Chief
Superintendent
Assistant Chief
Constable
Deputy Chief
Constable
Chief
Constable
Superintendent
SWYDDOG
MYFYRIWR
STUDENT
OFFICER
Student
Superintendent
SWYDDOG
MYFYRIWR
STUDENT
OFFICER
Student
Dog Section Sliders:
19
SPECIAL CONSTABLE
HEDDLU
POLICE
HEDDLU
POLICE
DYSGU
CYMRAEG
SIARAD
CYMRAEG
HEDDLU
POLICE
Hook Velcro Welsh Language Badges:
Hook Velcro Back and Front Badges: Epaulettes and Sliders:
Reflective Hook Velcro Back and Front Badges:
9999
SG/SC
SG/SC SG/SC SG/SC
Special
Sergeant
Special
Inspector
Special Chief
Inspector
Special
Chief Officer
9999
SG/SC
Special
Constable
SG/SC
Special
Superintendent
9999
SG/SC SG/SC
SG/SC SG/SC
Special Sergeant Special Inspector
Special
Superintendent
Special
Chief Officer
9999
SG/SC
SG/SC
Special Constable
Special Chief
Inspector
20
POLICE COMMUNITY SUPPORT OFFICER
SCC HEDDLU
POLICE CSO
SCC HEDDLU
POLICE CSO
DYSGU
CYMRAEG
SIARAD
CYMRAEG
SCC
HEDDLU
POLICE
CSO
Hook Velcro Welsh Language Badges:Hook Velcro Back and Front Badges: Epaulettes and Sliders:
Reflective Hook Velcro Back and Front Badges:
SCC
HEDDLU
C9999
POLICE
CSO
SCC
HEDDLU
C9999
POLICE
CSO
21
POLICE CADET, CADET LEADER AND SENIOR CADET
CADÉT YR HEDDLU
POLICE CADET CADÉT YRHEDDLU
POLICE
CADET
ARWEINYDD
CADETIAID
POLICE
CADET
LEADER
CADÉT HYN
YR HEDDLU
SENIOR
POLICE
CADET
^
CADÉT YR
HEDDLU
POLICE
CADET
CADÉT HYN
YR HEDDLU
SENIOR
POLICE
CADET
^ARWEINYDD
CADETIAID
POLICE
CADET
LEADER
CADÉT YR HEDDLU
POLICE CADET
DYSGU
CYMRAEG
SIARAD
CYMRAEG
CADÉT YR
HEDDLU
POLICE
CADET
Hook Velcro Welsh Language Badges:Hook Velcro Back and Front Badges: Epaulettes and Sliders:
Reflective Hook Velcro Back and Front Badges:
GWIRFODDOLWR
CYMORTH YR HEDDLU
POLICE SUPPORT
VOLUNTEER
GWIRFODDOLWR
CYMORTH YR
HEDDLU
POLICE SUPPORT
VOLUNTEER
GWIRFODDOLWR
CYMORTH YR
HEDDLU
POLICE SUPPORT
VOLUNTEER
Hook Velcro Back and Front Badges: Epaulettes and Sliders: Hook Velcro Welsh Language Badges:
POLICE STAFF VOLUNTEER
FORCE CHAPLAIN
CAPLAN YR HEDDLU
FORCE CHAPLAIN
Hook Velcro Back and Front Badges:
CAPLAN
YR HEDDLU
FORCE
CHAPLAIN
CAPLAN
YR HEDDLU
FORCE
CHAPLAIN
Epaulettes and Sliders:
DYSGU
CYMRAEG
SIARAD
CYMRAEG
CADÉT YR
HEDDLU
POLICE
CADET
Reflective Hook Velcro Back and Front Badges:
22
POLICE STAFF
STAFF YR HEDDLU
POLICE STAFF STAFF YR
HEDDLU
POLICE
STAFF
STAFF YR
HEDDLU
POLICE
STAFF
STAFF YR
HEDDLU
POLICE
STAFF
STAFF YR
HEDDLU
POLICE
STAFF
STAFF YR HEDDLU
POLICE STAFF
DYSGU
CYMRAEG
SIARAD
CYMRAEG
STAFF YR
HEDDLU
POLICE
STAFF
Hook Velcro Welsh Language Badges:Hook Velcro Back and Front Badges: Epaulettes and Sliders:
Reflective Hook Velcro Back and Front Badges:
YMCHWILYDD LLEOLIAD
TROSEDD YR HEDDLU
POLICE CRIME
SCENE INVESTIGATOR
SWYDDOG Y
CYFRYNGAU
MEDIA OFFICER
Communications
Supervisor
All Police Staff
23
Bronze Commander
from Insp to Ch Supt
Chief Constable
Assistant
Chief Constable
Superintendent
Inspector / Chief Insp
or Superintendent
Police Constable
Silver Commander
from Insp to Ch Supt
Deputy Chief
Constable
Chief Superintendent
Chief Inspector
Sergeant
Rank Slider SECTION NINE
PSU INSIGNIA
9999
POLICE
FRONT VIEW
BACK VIEW
Centre Line
9999
MEDIC
EGT
Dog Section
9999
Officer Collar No.
Rank Insignia
Officer Collar No.
Mutual Aid
Call-sign
WA
K9
EGT
MEDIC
Position of Helmet Markings
9999
POPSA
Medics
Evidence
Gathering Teams
EGT
9999
MEDIC
9999
Inspector
SECTION TEN
Infectious Disease
Pouch and Contents
• The contents should be checked
for any use by dates and a
replacement obtained from
divisional stocks.
Lightweight High Visibility Jacket
• 40°C machine or hand wash;
• Warm rinse, spin and line dry;
• Cool iron if required;
• Non-biological detergents must be
used.
Notebook covers
• Use saddle soap to clean as
necessary;
• Hide food may be used.
Overtrousers (waterproof)
• 40°C machine or hand wash;
• Do not use bleach or biological
detergent;
• Tumble dry at low setting;
• Can be dry cleaned.
Public Order Coveralls
• Maximum washing temperature
of 40°C, gentle setting for normal
soiling;
• Iron after each wash, medium heat
iron;
• Do not use bleach;
• Use proprietary spot dry cleaner
to remove oil or tar deposits;
• Dry cleanable, only dry clean after
wash removing all combustible
contaminants;
• Tumble dry on a low temperature
after each wash.
By following the washing and dry
cleaning instructions for your
individual garments, you will prolong
their life, keeping them smart and
tailored. Uniforms must be kept in a
clean and tidy condition at all times.
• Remember to hang up all garments
after wearing them;
• Do not wash garments that are dry
clean only;
• All uniform garments should be
neatly pressed;
• Try to use a liquid washing
detergent as this does not clog the
fibres;
• Wash dark colours separately.
Wash care symbols:
Please refer to manufacture instruction
on the garment labels, the below is a
guide only:
High Visibility Jackets
• Machine wash warm separately at
40°C, rinse thoroughly;
• Do not use bleach or fabric
softener;
• Tumble dry warm;
• Steam iron warm;
• If professionally dry cleaned, clean
distilled solvent must be used;
• Do not use biological washing
powder;
• Do not store damp, drip dry;
• Do not dry on radiator;
• Do not allow coated fabrics to
come into contact with repellent,
hair spray, or alcohol based
products.
Baton Holder
• Use saddle soap to clean as
necessary;
• Hide food may be used.
Belts (leather) and Waist Belts
• Use saddle soap to clean as
necessary;
• Hide food may be used.
Cravat
• 40°C machine or hand wash;
• Short spin and line dry;
• Cool iron;
• Can be dry cleaned.
Epaulettes
• 40°C machine or hand wash
(remove plastic numbers or plates
prior to washing);
• Short spin and line dry;
• Cool iron;
• May be dry cleaned.
Gloves (leather) Uniform,
PSU Gloves and Motorcycle
• Use saddle soap to clean as
necessary;
• Hide food may be used.
24
Care Instructions for Uniform and Equipment
• Machine wash
& temperature
• Hand wash
• Do not bleach
• Do not tumble dry
• Cool tumble dry
• May be dry cleaned
• Dry clean only
• Cool iron
• Medium iron
• Hot iron
• Do not iron
Cotton Coveralls
• 40°C machine or hand wash;
• Line dry, spin or tumble dry;
• Hot iron.
Boots
• Clean leather with a damp cloth
to remove dirt and stains;
• Apply wax polish to improve water
resistance and to keep leather
supple;
• Never force boots which have been
saturated to dry, allow them to dry
naturally.
P.S.U. Guards
(arm, thigh, shin and knee)
• Wipe clean with a damp cloth
wrung out in warm water
containing liquid detergent, or by
using the same procedure with
antiseptic (i.e. Dettol);
• Any item which has been
contaminated by blood or bodily
fluids should be disposed of as
clinical waste and incinerated.
Shirts
• 40°C machine or hand wash;
• Do not bleach;
• Cold rinse;
• Short spin or drip dry;
• Moderate iron.
Speedcuffs Pouches
• Use saddle soap to clean as
necessary;
• Hide food may be used.
Ties
• 40°C machine wash;
• Short spin or drip dry;
• Cool iron;
• May be dry cleaned.
Torch Holder
• Use saddle soap to clean as
necessary;
• Hide food may be used.
Trousers (lightweight poly/wool)
• 40°C wool cycle;
• Do not bleach
• Cool iron.
Operational Trousers
• 40°C machine or hand wash;
• Warm iron;
• Do not bleach;
• Where possible use colour care
washing powders.
Tunic
• Dry clean only.
Fleece
• 40°C machine or hand wash;
• Short spin;
• Do not wring;
• Cold iron if required;
• Do not tumble dry.
Equipment Vest
The vest can be wiped down with a
damp cloth to remove marks. Use
a mild soap if necessary.
To handwash, remove all pockets and
fasten the velcro on the elasticated
waist strap and the main flap.
Handwash at 40°C Maximum. Allow
to air dry, ideally on a hanger. Do
not force dry on a radiator etc.
Operational Top
• 40°C machine or hand wash;
• Short spin;
• Do not wring;
• Cold iron if required;
• Do not tumble dry.
25
26
POLICE OFFICER
UNIFORM ENTITLEMENTSECTION ELEVEN
27
Police Officers Uniform Entitlement
Replacement Uniform:
Please make sure that any old uniform that
requires replacement is returned to Supplies
as soon as practically possible, preferably
with the request for a replacement.
If this is not practical then it must be returned
within 7 days of receiving the replacement.
Where replacements quantities frequencies
are considered to be high replacements will
not be issued.
Reasonable Adjustments:
Officers who wear a uniform but are
experiencing issues due to a medical
condition should contact their supervisor
initially to discuss alternatives, once
alternatives have been agreed a workplace
passport form must be fully completed
and submitted to Supplies for action.
Temporary Promotions /
Acting Duties:
Officers who are carrying out acting duties
in a higher rank are entitled to wear the
insignia of the higher rank whilst carrying out
those duties. When officers have completed
their acting duties, they must revert back to
wearing the insignia of their rank.
Changing Roles:
You have a responsibility to act as the
custodian for all of the items of uniform and
equipment issued to you throughout your
career with NWP.
On changing roles it is your personal
responsibility to return all of your uniform
and/or equipment used, or unused. Please
ensure that you contact Supplies to arrange
a date and time so that you can return your
uniform and/or equipment in person.
The return of uniform and/or equipment
can be actioned prior to your change of
role or up to 2 weeks after your last day
in your old role. Supplies can be contacted
on [removed by PoliceFOI]
Supplies will take receipt of all uniform and/
or equipment and where appropriate it will be
re-cycled or disposed of in the appropriate
manner eliminating any security risks to
North Wales Police.
Index ...................................................................................Page
1. Collision Investigation Officer .................................................... 28
2. Covert Officer ............................................................................. 28
3. Divisional Trainer ...................................................................... 28
4. Dog Handler .............................................................................. 28
5. Dog Trainer ............................................................................... 28
6. Drone Operative ........................................................................ 28
7. FCIN Regional Manager, Performance and
Standards Manager or Field Event Manager ................................ 28
8. Firearms Officer ........................................................................ 29
9. Football Officer ......................................................................... 29
10. Force Negotiator ....................................................................... 29
11. Maternity / Menopause Wear ..................................................... 29
12. Method of Entry (MoE) Equipment .............................................. 29
13. Motorcycle Officer ..................................................................... 29
14. Motorcycle Off Road Officer ....................................................... 30
15. Mountain Rescue Team ............................................................. 30
16. Online Child Abuse Investigation Team ....................................... 30
17. Pedal Cycle Patrol Officer .......................................................... 30
18. Police Officer ............................................................................ 31
19. Police Special Constable ........................................................... 31
20. Port Officer ............................................................................... 32
21. Priority Crime Team ................................................................... 32
22. Protest Removal Officer ............................................................. 32
23. Public Order Officer ................................................................... 32
24. Road Policing Officer ................................................................. 32
25. Rural Crime Officer .................................................................... 32
26. Search Team Officer .................................................................. 33
27. Senior Managed Team (CC/DCC/ACC) ........................................ 33
28. Surveillance Officer ................................................................... 33
29. Surveillance Officer Motorcycle .................................................. 33
30. Surveillance Officer (Rural) ......................................................... 33
31. Tactical Firearms Commander ................................................... 33
32. Training Officer Classroom Based ............................................. 34
33. Training Officer Operational ...................................................... 34
34. Training Officer Public Order ...................................................... 34
35. Training Officer Taser and MOE ................................................ 34
28
1. Collision Investigation Officer
1 x Coverall
1 x Gloves Nitrile EN 388:2016/EN 388:2003
1 x Gloves Cut Protection to
EN 388 Lev el & EN 407:2004
1 x Gloves Rigger to EN388
1 x Hard Hat to EN397
1 x Head Torch
1 x High Visibility Lightweight Jacket
EN ISO 204 71 Class 3
1 x High Visibility Over Tr ousers
EN ISO 204 71 Class 3
1 x High Visibility Overall EN ISO 20471 Class 3
1 x High Visibility Waterproof Suit
EN ISO 204 71 Class 3
1 x Kit Bag
1 x Knee Pads to EN1440 4:2004
1 x Micro F leece
1 x Safety Goggles to EN166 3.4b
1 x Safety Wellington Boots to EN 20345
1 x Winter Hat2. Covert Officer
1 x Covert Harness
3. Divisional Trainer
(Issued via Divisional Manager, all black,
non marking sole to value of £50)
1 x Trainers
4. Dog Handler
1 x Active Hearing Defenders
(For Firearms Support (FSD) Dog Handlers only)
1 x Ballistic Body Armour to HO2/KR1/SP1
and Plates t o HO3/SG1
1 x Ballistic Helmet
1 x EGT Gloves
1 x Full PS U Kit
1 x Head Torch
1 x Mid-La yer Fleece
6 x Operational Shirts (Tactical)
4 x Operational Trousers (Tactical)
1 x Safety Goggles to EN166 3.4b
1 x Safety Wellington Boots to EN 20345
2 x Walkin g Boots
1 x Waterp roof Jacket (Black)
1 x Winter Hat
5. Dog Trainer
1 x Operational Vest (Blue Yoke)
6. Drone Operative
1 x Bump C ap to EN812
1 x Gloves (with stretch)
1 x Head Torch
1 x Mid-La yer Fleece
1 x Safety Wellington Boots to EN 20345
1 x Waterp roof Jacket (Black)
1 x Waterp roof Over Trousers (Black)
1 x Winter Hat
7. FCIN Regional Manager,
Performance and Standards Manager
or Field Event Manager
1 x Coverall
1 x Gloves Nitrile EN 388:2016/EN 388:2003
1 x Gloves Cut Protection to
EN 388 Lev el & EN 407:2004
1 x Gloves Rigger to EN388
1 x Hard Hat to EN397
1 x Head Torch
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x High Visibility Lightweight Jacket
EN ISO 204 71 Class 3
1 x High Visibility Over Tr ousers
EN ISO 204 71 Class 3
1 x High Visibility Overall EN ISO 20471 Class 3
1 x High Visibility Waterproof Suit
EN ISO 204 71 Class 3
1 x Kit Bag
1 x Knee Pads to EN1440 4:2004
1 x Safety Goggles to EN166 3.4b
1 x Safety Wellington Boots to EN 20345
1 x Winter Hat29
8. Firearms Officer
1 x Active Hearing Defend ers with Micro-phone
IP67 Rated EN 352-2 - Min imum 28dB
1 x Ballistic Body Armour to HO2/KR1/SP1
and Plates t o HO3/SG1
1 x Ballistic Helmet
1 x Baseball Cap (Foldabl e)
1 x Boots No Steel Toe Ca p or Mid Sole EN20347
1 x Day Sa ck 25 - 30 Litre Rucksack
1 x Knee Pads to EN14404:2004
1 x Mid-Layer Fleece
1 x Tactical Eye Protectio n
STANAG 29 20 CE - EN166
1 x Tactical Gloves
6 x Operat ional Shirts (Tactical)
4 x Operat ional Trousers (Tactical)
1 x Waterp roof Jacket (Black)
1 x Waterp roof Over Trousers (Black)
1 x Winter Hat
9. Football Officer
1 x Bump C ap to EN812
1 x Kit Bag
1 x Over Trousers (Black)
1 x Operational Vest
1 x Trousers Operational (Heavy Weight)
1 x Waterproof Jacket (Black)
10. Force Negotiator
1 x Active Hearing Defenders
1 x Ballistic Body Armour to HO2/KR1/SP1
and Plates t o HO3/SG1
1 x Ballistic Helmet
1 x Gloves (Winter)
1 x Head Torch
1 x Mid-layer Fleece (Red)
1 x Over Trousers (Black)
1 x Rucksack
1 x Waterproof Jacket (Red)
1 x Winter Hat (not police marked)
11. Maternity Wear Officer who become pregnant
and wear a Uniform before they became pregnant
are entitled to maternity Uniform and should contact
Supplies to discuss the options available to them.
12. Method of Entry (MoE) Equipment
1 x Coverall
1 x Kevlar Balaclava
1 x Kevlar Inner Gloves an d Sleeves
1 x Kevlar Neck Roll
1 x Safety Goggles to EN166 3.4b
Plus full Public Order issue
13. Motorcycle Officer
1 x Balaclava
1 x Ear Moulds
1 x Foul W eather Suit (Black)
1 x Heated Body Warmer
1 x High Visibility Mesh Jacket
(with Airbag) EN ISO 2047 1 Class 3
1 x High Visibility Mesh Jacket EN ISO 20471 Class 3
1 x High Visibility Mesh Jacket EN ISO 20471 Class 3
(Special escort only or rep lament jacket needed)
1 x High Visibility Waterproof Outer Jacket
EN ISO 204 71 Class 3
1 x Jacket CE Approved Textile
1 x Leg Holster for Baton
1 x Leg Holster for Cuffs and Spray
1 x Leg Holster for Taser
1 x Motorc ycle Backplate EN 1621-2:2014 (Optional)
1 x Motorc ycle Boots to EN 13634:2017
1 x Motorc ycle Chest plate to
EN 1621-3:2 018 (Optional)
1 x Motorc ycle Gloves Summer EN 13594:2015
1 x Motorc ycle Gloves Winter EN 13594:2015
1 x Motorc ycle Helmet comms
1 x Motorc ycle Helmet to ECE 22.06
1 x Motorc ycle Jacket Airbag to
EN 1621-4:2 013 or EN 1621-5:2013
1 x Motorc ycle Trousers EN 13595 Level 2
1 x Neck Sleeve
1 x Over Tr ousers (Black)
2 x Thermal Tops (Summer)
2 x Thermal Tops (Winter)
2 x Thermal Trousers (Summer)
2 x Thermal Trousers (Wi nter)
1 x Waterproof Over Jacket (Black)
30
14. Motorcycle Off Road Officer
1 x High Visibility Summe r Jacket
EN ISO 204 71 Class 3
1 x High Visibility Winter Jacket
EN ISO 204 71 Class 3
1 x Motorc ycle Backplate
EN 1621-2:2 014 (Optional)
1 x Motorc ycle Boots to EN 13634:2017
1 x Motorc ycle Chest plate to
EN 1621-3:2 018 (Optional)
1 x Motorc ycle Gloves Summer EN 13594:2015
1 x Motorc ycle Gloves Winter EN 13594:2015
1 x Motorc ycle Helmet to ECE 22.06
1 x Motorc ycle Helmet Pinlock
1 x Motorc ycle Jacket Airbag to
EN 1621-4:2 013 or EN 1621-5:2013
1 x Motorc ycle Jacket EN 13595 Level 2
1 x Motorc ycle Trousers EN 13595 Level 2
1 x Neck Sleeve
1 x Over Tr ousers EN ISO 20471 Class 3
15. Mountain Rescue Team
1 x Baseball Cap
1 x Base Layer Bottoms
1 x Base Layer Top
1 x Boots - Walking / Mountain
1 x Climbing Helmet
1 x Climbing Hernsess
1 x Covert Harness
1 x Dry Sack
1 x Gloves (Winter)
1 x Head Torch
1 x Ligature Cutters
1 x Lightweight Wet and Windy Shower Jacket
1 x Microspikes (Crampons, Ice Cleats for
Shoes and Boots, Snow Grips)
1 x Mid-Layer Fleece
1 x Over Trousers (Black)
1 x Rucksack (with Dry Sack)
1 x Safety Gloves to EN 388
1 x Safety Goggles to EN166 3.4b
1 x Small First Aid Pouch
1 x Trousers Operational (Heavy Weight)
1 x Trousers Operational (Lightweight)
1 x Waterproof Jacket (Blue)
1 x Winter Hat
16. Online Child Abuse Investigation Team
1 x Waterp roof Jacket (Black)
17. Pedal Cycle Patrol Officer
1 x Cycle G lasses to EN 1836: 1997
1 x Cycle Helmet to EN 10 78
1 x Cycle G loves (Summer)
1 x Cycle G loves (Winter)
1 x High Visibility Cycle Jacket to EN47131
18. Police Officer
1 x Baton
1 x Baton H older
1 x Body Armour
1 x Buckle Cover
1 x Belt (Eq uipment)
1 x Belt (T rouser)
1 x Bowler Hat
1 x Cravat
2 x Epaulettes (Pair)
1 x Flat Ca p
1 x Full Zip Fleece
1 x Gloves Cut Protection to
EN 388 Lev el 5, EN 407 & EN420
1 x Handcuffs
1 x Handcuffs Pouch
1 x Helmet
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x High Visibility Lightweight Jacket
EN ISO 204 71 Class 3
1 x Ligature Cutter
1 x Long Handcuffs Key
1 x Micro F leece
1 x Mid-Layer Fleece
1 x Molly Pouch Set
6 x Operat ional Tops
1 x Over Tr ousers (Black)
1 x Personal Protection K it
1 x Pocket Book Cover
3 x Rank S liders
1 x Safety Boots to EN 20345
2 x Silicone Wedding Bands (optional)
1 x Skirt (on request)
1 x Spray Holder
1 x Tie
1 x Torch
1 x Trousers Operational (Heavy Weight)
3 x Trousers Operational (Lightweight)
1 x Trousers (Uniform)
1 x Tunic (Uniform)
1 x Warrant Card Holder
2 x White Shirts (must ha ve one short sleeved)
19. Police Special Constable
1 x Baton
1 x Baton H older
1 x Body Armour
1 x Buckle Cover
1 x Belt (Eq uipment)
1 x Belt (T rouser)
1 x Bowler Hat
1 x Cravat
1 x Epaulettes (Pair)
1 x Flat Ca p
1 x Full Zip Fleece
1 x Gloves Cut Protection to
EN 388 Lev el 5, EN 407 & EN420
1 x Handcuffs
1 x Handcuffs Pouch
1 x Helmet
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x High Visibility Lightweight Jacket
EN ISO 204 71 Class 3
1 x Ligature Cutter
1 x Long Handcuffs Key
1 x Micro F leece
1 x Mid-Layer Fleece
1 x Molly Pouch Set
2 x Operat ional Tops
1 x Over Tr ousers (Black)
1 x Personal Protection K it
1 x Pocket Book Cover
3 x Rank S liders
1 x Safety Boots to EN 20345
2 x Silicone Wedding Bands (optional)
1 x Skirt (on request)
1 x Spray Holder
1 x Tie
1 x Torch
1 x Trousers Operational (Heavy Weight)
3 x Trousers Operational (Lightweight)
1 x Trousers (Uniform) - on request
1 x Tunic (Uniform) - on re quest
1 x Warrant Card Holder
2 x White Shirts (must ha ve one short sleeved)
32
20. Port Officer
1 x Bump C ap to EN812
1 x Ear Defenders to EN352-1
1 x Gloves Cut Protection to
EN 388 Lev el 5 & EN 407
1 x Gloves Rigger to EN388
1 x Hard Hat to EN397
1 x Head Torch
1 x Knee Pads to EN1440 4:2004
1 x High Visibility Over Tr ousers
EN ISO 204 71 Class 3
1 x Neck Sleeve
1 x Safety Goggles EN166.201
2 x Trousers (Heavy-Duty Water repellent)
1 x Waterp roof Thermal Over Trousers
1 x Winter Hat
21. Priority Crime Team
1 x Bump C ap to EN812
1 x Covert Harness
1 x Waterp roof Jacket (Black)
1 x White Armour Cover
22. Protest Removal Officer
1 x Belt (Eq uipment)
1 x Bump C ap to EN812
1 x Coverall (Search)
1 x Document Pouch
1 x Ear Defenders to EN352-1 (Noise Cancelling)
1 x Half Fa ce Respirators EN 140, AFP20, EN 143.
1 x Hard Hat to EN397
1 x Head Torch
1 x Kit Bag
1 x Knee Pads to EN1440 4:2004
1 x Safety Gloves EN 388
1 x Safety Goggles to EN166 3.4b
1 x Waterp roof Jacket (Black)
23. Public Order Officer
1 x Arm Gu ards (Pair)
1 x Arnold Baton
1 x Arnold Baton Holder w ith Belt Loop
1 x Baseball Cap
2 x Base Layer Top for Under Coverall
2 x Base Layer Trousers for Under Coverall
1 x Carabiner
1 x Coverall
1 x Cricket Box / Groin Guard
1 x EGT Gl oves (Qualifying Officers Only)
1 x Flamep roof High Visibility Tabard
1 x Flame Retardant Coveralls
1 x Jock Strap
1 x Kit Bag
1 x Leg Guards (Pair)
1 x Metata rsal Guard
1 x Public Order Gloves
1 x Public Order Helmet
1 x Rank S liders - Flame Retardant
1 x Safety Boots to EN 20345
1 x Safety Goggles to EN166 3.4b
1 x Shoulder / Upper Arm Guard
1 x Thigh G uards (Pair)
1 x Water F lask with Holder
24. Roads Policing Officer
1 x Gloves (Winter)
1 x High Visibility Waterproof Over Trousers
1 x Torch
1 x Waterp roof Thermal Over Trousers
1 x White Cap or Bowler H at
25. Rural Crime Officer
1 x Bump C ap to EN812
1 x Ear Defenders to EN352-1
1 x Hard Hat to EN397
1 x Head Torch
1 x Kit Bag
1 x Knee Pads to EN1440 4:2004
1 x Rigger Boots Black to EN 20345
1 x Rigger Gloves to EN38 8
1 x Safety Goggles to EN166 3.4b
1 x Waterp roof Jacket (Black)
33
26. Search Team Officer
1 x Bump C ap to EN812
1 x Coverall (Search)
1 x Ear Defenders to EN352-1
1 x Gloves - Lightweight (Search)
1 x Gloves Rigger to EN388
1 x Hard Hat to EN397
1 x Head Torch
1 x Kit Bag
1 x Knee Pads to EN1440 4:2004
1 x Over Tr ousers (Black)
1 x Safety Boots to EN 20345
1 x Safety Goggles to EN166 3.4b
1 x Safety Wellington Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
1 x Waterp roof Jacket (Black)
1 x Winter Hat
27. Senior Manager Team (CC / DCC / ACC)
1 x Waterp roof Jacket (Black)
28. Surveillance Officers
1 x Bump C ap to EN812
1 x Gloves (with stretch)
1 x Head Torch
1 x Mid-La yer Fleece
1 x Safety Wellington Boots to EN 20345
1 x Thornproof Gloves EN2388
1 x Trousers (Waterproof )
1 x Walkin g Boots
1 x Waterp roof Jacket
1 x Winter Hat
29. Surveillance Officer Motorcycle
1 x Balaclava
1 x Heated Vest with Additional Battery Pack
1 x Kit Bag
5 x Mid-layer
1 x Motorc ycle Backplate EN 1621-2:2014 (Optional)
2 x Motorc ycle Boots to EN 13634:2017
1 x Motorc ycle Chest plate to
EN 1621-3:2 018 (Optional)
2 x Motorc ycle Gloves EN 13594:2015
2 x Motorc ycle Helmet to ECE 22.06
2 x Motorc ycle Helmet Pinlock
2 x Motorc ycle Helmet Spare Visors
1 x Motorc ycle Inner gloves
1 x Motorc ycle Jacket Airbag to
EN 1621-4:2 013 or EN 1621-5:2013
2 x Motorc ycle Jacket EN 13595 Level 2
1 x Motorc ycle Rain Suit
2 x Motorc ycle Trousers EN 13595 Level 2
1 x Neck Sleeve
3 x Thermal Tops
3 x Thermal Trousers
30. Surveillance Officer (Rural)
Restricted Access List speak to Supply
Manager or Head of Procurement
31. Tactical Firearms Commander
1 x Ballistic Body Armour to HO2/KR1/SP1
and Plates t o HO3/SG1
1 x Ballistic Helmet
1 x Waterp roof Jacket (Black)34
32. Training Officer Classroom Based
1 x Mid-La yer Fleece (Red)
1 x Tie or Cravat
2 x Trousers (uniform)
5 x White Shirts
33. Training Officer Operational
1 x Mid-La yer Fleece (Red)
5 x Operat ional Tops (Red)
1 x Operat ional Vest (Blue Yoke)
1 x Waterp roof Jacket (Red)
34. Training Officer Public Order
1 x Gloves - Flameproof to EN 407
1 x Mid-La yer Fleece (Red)
5 x Operat ional Tops (Red)
1 x Operat ional Vest (Blue Yoke)
1 x Waterp roof Jacket (Red)
35. Training Officer Taser and MOE
1 x Mid-La yer Fleece (Red)
5 x Operat ional Tops (Red)
1 x Operat ional Vest (Blue Yoke)
1 x Waterp roof Jacket (Red)
35
POLICE STAFF
UNIFORM ENTITLEMENT
36
SECTION TWELVE
Replacement Uniform:
Please make sure that any old uniform that requires replacement is returned to Supplies as soon as practically possible,
preferably with the request for a replacement. If this is not practical then it must be returned within 7 days of receiving the
replacement. Were replacements quantities frequencies are considered to be high replacements will not be issued.
Reasonable Adjustments:
Officers who wear a uniform but are experiencing issues due to a medical condition should contact their supervisor initially
to discuss alternatives, once alternatives have been agreed a workplace Adjustment form must be fully completed and
submitted to Supplies for action.
Changing Roles:
You have a responsibility to act as the custodian for all of the items of uniform and equipment issued to you throughout
your career with NWP. On changing roles it is your personal responsibility to return all of your uniform and/or equipment
used, or unused. Please ensure that you contact Supplies to arrange a date and time so that you can return your uniform
and/or equipment in person. The return of uniform and/or equipment can be actioned prior to your change of role or up
to 2 weeks after your last day in your old role. Supplies can be contacted on [removed by PoliceFOI]
Supplies will take receipt of all uniform and/or equipment and where appropriate it will be re-cycled or disposed of in the
appropriate manner eliminating any security risks to North Wales Police.
Police Staff Uniform Entitlement
Index ..............................................................Page
1. All Staff ............................................................ 37
2. ANPR Technician ............................................... 37
3. Casualty Reduction Officer .................................. 37
4. Checkpoint Navigators ....................................... 37
5. Chemical Treatment Officer ................................. 37
6. Civilian Investigator ............................................ 37
7. Cleaner including Supervisor ............................... 37
8. Collision Investigator .......................................... 37
9. Communication Officer ....................................... 38
10. Communication Supervisor .................................. 38
11. Coroners Officer .................................................. 38
12. Corporate Communications - Media Officer .......... 38
13. Crime Scene Investigator .................................... 38
14. Custody Health Care Practitioner ......................... 38
15. Detention Officer ................................................. 38
16. Digital Forensic Technician ................................ 39
17. Driver Instructor .................................................. 39
18. Dog Legislation Officer ...................................... 39
19. Evidence Gatherer (Roadside) ............................. 39
20. FCIN Regional Manager, Performance and
Standards Manager or Field Event Manager ......... 39
21. Financial Investigator ........................................ 39
22. Fingerprint Expert and Technician ....................... 39
23. Firearms Enquiry Officer ..................................... 40
24. Firearms Range Warden ...................................... 40
25. Fleet Technicians and Mechanic ......................... 40
26. Force Chaplin .................................................... 40
27. Force Printer .................................................... 40
28. Forensic Submission Officer .............................. 41
29. Front Counter Assistant ..................................... 41
30. Go Safe Community Speed Watch Co-ordinator ... 41
Index ..............................................................Page
31. Health and Safety Manager / Assistant .............. 41
32. Holyhead Port Regional Control Desk Assistant .. 41
33. I24 Officer ......................................................... 41
34. Licensing Officer ............................................... 41
35. Logistic Operative ............................................. 41
36. Maternity Wear .................................................. 41
37. Motorbike Instructor .......................................... 42
38. Motorbike Mechanic .......................................... 42
39. Occupational Health Registered Nurse .............. 42
40. Operational Planning Support Officer ................. 42
41. Police Cadet .................................................... 43
42. Police Cadet Leader ......................................... 43
43. Police Senior Cadet ........................................... 43
44. Police Community Support Officer ...................... 43
45. Police Community Support Officer - Search Team 44
46. Policing Skills Assessor ..................................... 44
47. Police Staff Volunteer ........................................ 44
48. Receptionist FHQ and DHQ ................................ 44
49. Receptionist Fleet ............................................. 44
50. Records Management ....................................... 45
51. Recruitment Team ............................................. 45
52. SARC Nurse ....................................................... 45
53. Seized Property Clerk ........................................ 45
54. Staff undertaking Prison Visits ........................... 45
55. Supplies Officer ................................................. 45
56. Training Officer Classroom Based ...................... 45
57. Training Officer Operational ............................... 45
58. Training Officer Public Order ............................... 45
59. Training Officer Taser and MOE .......................... 45
60. Vehicle Examiner ............................................... 46
37
1. All Staff
1 x Name Badge
1 x Personal Protection Kit
1 x Silicone Wedding Band
2. ANPR Technician
1 x Belt (Trouser)
1 x Fleece (Blue)
1 x High Visibility Jacket EN ISO 20471 Class 3
5 x Operational Tops (Blue)
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
1 x Winter Hat
3. Casualty Reduction Officer
1 x Belt (T rouser)
1 x Fleece (Blue)
1 x High Visibility Jacket EN ISO 20471 Class 3
5 x Operational Tops (Blue)
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
1 x Winter Hat
4. Checkpoint Navigators
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x Overtrousers back
1 x Rank Sliders
1 x Safety Boots to EN 20345
5. Chemical Treatments Officer
1 x Belt (T rouser)
1 x Boiler S uit
1 x Hard Hat to EN397
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x Knee Pads to EN1440 4:2004
1 x Micro F leece
5 x Operat ional Tops
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
6. Civilian Investigator
1 x Body Armour
1 x Coverall
1 x Tabard (Yellow)
1 x Rank S liders
1 x Safety Boots to EN 20345
7. Cleaner including Supervisor
1 x Belt (Trouser)
1 x High Visibility Jacket EN ISO 20471 Class 3
(if working outside)
1 x Micro F leece
5 x Operat ional Tops
1 x Overtrousers (if working outside)
2 x Rank Sliders
1 x Safety Boots to EN 20345
2 x Tabards (Cleaner)
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
8. Collision Investigator
1 x Coverall
1 x Gloves Cut Protection to EN 388 Level 5 & EN 407
1 x Gloves Nitrile EN 388:2016/EN 388:2003
1 x Gloves Rigger to EN388
1 x Hard Hat to EN397
1 x Head Torch
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x High Visibility Lightweight Jacket
EN ISO 204 71 Class 3
1 x High Visibility Over Tr ousers
EN ISO 204 71 Class 3
1 x High Visibility Overall EN ISO 20471 Class 3
1 x High Visibility Waterproof Suit
EN ISO 204 71 Class 3
1 x Kit Bag
1 x Knee Pads to EN1440 4:2004
1 x Micro F leece
1 x Mid-Layer Fleece
5 x Operat ional Tops
2 x Rank Sliders
1 x Safety Goggles to EN166 3.4b
1 x Safety Wellington Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
1 x Winter Hat
38
9. Communications Officer
1 x Belt (T rouser)
1 x Full Zip Fleece (on request)
1 x Micro F leece
5 x Operat ional Tops
2 x Rank Sliders
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)10. Communication Supervisor
1 x Belt (T rouser)
1 x Full Zip Fleece (on request)
1 x Micro F leece
5 x Operat ional Tops
2 x Rank Sliders
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)11. Coroner’s Officer
1 x Belt (T rouser)
1 x Micro F leece
5 x Operat ional Tops
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
12. Corporate Communications - Media Officer
1 x Belt (T rouser)
1 x High Visibility Jacket EN ISO 20471 Class 3
2 x Media Officer Badges
1 x Micro F leece
2 x Operat ional Tops
1 x Over Tr ousers (Black)
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
13. Crime Scene Investigator
1 x Baseball cap
1 x Belt (T rouser)
1 x Boiler S uit
1 x Gloves Rigger to EN388
1 x Gloves (Winter)
1 x Hard Hat to EN397
1 x Head Torch
1 x Knee Pads to EN1440 4:2004
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x Micro F leece
1 x Mid-Layer Fleece
6 x Operat ional Tops
1 x Over Tr ousers (Black)
2 x Rank Sliders
1 x Safety Goggles to EN166 3.4b
1 x Safety Boots to EN 20345
1 x Safety Wellington Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
1 x Winter Hat
14. Custody Health Care Practitioner
1 x High Visibility Jacket EN ISO 20471 Class 3
2 x Micro F leece
1 x Mid-Layer Fleece
6 x Navy S crub Tops
6 x Navy S crub Trousers
2 x Rank Sliders
1 x Safety Boots to EN 20345
15. Detention Officer
1 x Belt (T rouser)
1 x Body Armour
1 x Micro F leece
1 x Mid-Layer Fleece
1 x Personal Protection P ouch
6 x Operat ional Tops
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
16. Digital Forensic Technician
1 x Belt (T rouser)
1 x Micro F leece
5 x Operat ional Tops
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
17. Driver Instructor
1 x Belt (T rouser)
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x Mid-layer Fleece
5 x Operat ional Tops
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)18. Dog Legislation Officer
1 x Head Torch
1 x Mid-La yer Jacket
6 x Operat ional Tops
2 x Rank Sliders
1 x Safety Wellington Boots to EN 20345
2 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
1 x Walkin g Boots
1 x Waterp roof Jacket (Black)
1 x Winter Hat
19. Evidence Gatherer (Roadside)
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x Mid-La yer Fleece
1 x Rank Sliders
1 x Safety Boots to EN 2034520. FCIN Regional Manager, Performance and
Standards Manager or Field Event Manager
1 x Bump C ap to EN812
1 x Coverall
1 x Gloves Cut Protection to
EN 388 Lev el & EN 407:2004
1 x Gloves Nitrile EN 388:2016/EN 388:2003
1 x Gloves Rigger to EN388
1 x Hard Hat to EN397
1 x Head Torch
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x High Visibility Lightweight Jacket
EN ISO 204 71 Class 3
1 x High Visibility Over Tr ousers
EN ISO 204 71 Class 3
1 x High Visibility Overall EN ISO 20471 Class 3
1 x High Visibility Waterproof Suit
EN ISO 204 71 Class 3
1 x Kit Bag
1 x Knee Pads to EN1440 4:2004
1 x Micro F leece
1 x Mid-Layer Fleece
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Safety Goggles to EN166 3.4b
1 x Safety Wellington Boots to EN 20345
5 x Operat ional Tops
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
1 x Winter Hat
21. Financial Investigators
1 x Body Armour
1 x Rank Sliders
1 x White Armour Cover
22. Fingerprint Expert and Technician
1 x Belt (T rouser)
1 x Hard Hat to EN397
1 x High Visibility Jacket EN ISO 20471 Class 3
1 x Micro F leece
5 x Operat ional Tops
2 x Rank Sliders
1 x Safety Boots to EN 20345
1 x Trousers Operational (Heavy Weight)
2 x Trousers Operational (Lightweight)
39
40
23. Firearms Enquiry Officer
1 x Belt (T rouser)
1 x Ear Defenders to EN352-1
1 x Gloves RigThe text stops here, at 100,000 characters: the file has the rest.
© North Wales Police. Reproduced for non-commercial purposes from https://www.northwales.police.uk/SysSiteAssets/foi-media/north-wales/disclosure-2026/2026-827-standards-of-appearance-and-dress.pdf under North Wales Police's publication scheme terms, which allow free reproduction if accurate and not misleading, with the source and copyright acknowledged. The text only, as read from the published documents; material owned by others is not covered. Collected on 2 September 2026; North Wales Police may have changed or withdrawn it since.
If this text names you or you own part of it, ask us to take the full text down: it is hidden as soon as you send the form, and the title and summary stay.
Related releases
- 2024-1160 Glass attacks Disclosure log response · North Wales Police · 1 Jan 2027
- 2026 -901 Britannia Bridge Crossing Disclosure log response · North Wales Police · 22 Sept 2026
- 2026-967 Crimes committed at pharmacies Disclosure log response · North Wales Police · 22 Sept 2026
- 2026-936 Police non-fatal strangulation and suffocation offences Disclosure log response · North Wales Police · 21 Sept 2026
- 2026- 940 theft and burglary at construction sites Disclosure log response · North Wales Police · 21 Sept 2026
Ask us to remove a name from this page (free) · Report a mistake