FOI 2025-1113_Digital-evidenceDisclosure log response · Wiltshire Police
FOI 2025-1113_Digital-evidence
Read it at Wiltshire Police's website
- Published
- 22 Dec 2025
- Published by
- Wiltshire Police
- Outcome
- Refused
- Exemption
- Section 21 Already reasonably accessible, for example published elsewhere
- Source
- Wiltshire Police's website
- Recorded by PoliceFOI
- 2 Sept 2026
We read the outcome and the exemption automatically from the response's own words, so this can be wrong: report a mistake. What the outcomes and codes mean.
In full, as Wiltshire Police published it
We show a record in full only where its publisher's terms allow it. Most police forces in England and Wales publish under the same publication scheme terms: anyone may reproduce a force's own material free of charge if it is accurate and not misleading and the source and copyright are acknowledged, but not for any commercial purpose. PoliceFOI is published by a company, so we treat our use as commercial, and for those forces we show each record's title and summary, with a link to the original, until the force agrees to more. A few forces' terms are stricter still. None of these terms covers material owned by someone else, or a force's logo, so we link to such material rather than copy it.
Files
- File PDF, 435 KB
The original
The text of this file
WILTSHIRE POLICE
XXXX – Via email
Police Headquarters
London Road
DEVIZES
Wiltshire
SN10 2DN
[removed by PoliceFOI]
Date: 22nd December 2025 Our ref: FOI 2025-1113
Dear [requester],
I write in connection with your request for information dated 24th November regarding the
documentation and reporting of digital evidence.
I am required by the Freedom of Information Act 2000 to handle all requests in a manner
that is blind as to the identity and motives of the requestor. Any information released as a
response to a request is regarded as being published and therefore in the public domain
without caveat.
Following receipt of your request, research was conducted by South West Forensics.
Your request for information has now been considered, and I am able to respond as
follows.
You wrote (and our response):
I would like to request the following information regarding the documentation and
reporting of digital evidence. To support consistent interpretation, the terms used in this
request are defined in the glossary below.
1. Is a Chain of Custody (CoC) and/or Audit Trail (AT) recorded when digital evidence
is processed and analysed?
Yes. All continuity of the exhibit is recorded from the point of seizure in accordance with
Sections 21 and 22 of the Police and Criminal Evidence Act 1984. Within the Digital
Forensics environments, further records are retained to record the exhibit movements and
equipment used to acquire data and the equipment used for the subsequent
examination of the data. (hardware and software versions) in accordance with our
accreditation standards to ISO 17025.
(If your force uses other documentation or logging mechanisms that perform the same or
similar function to a CoC or AT, even if not labelled as such, please include these within
the scope of the response.)
If yes, please provide:I. Details of the information that is recorded as part of the CoC and AT.
With regards to the continuity of evidence, this is compliant with Sections 21 and 22 of the
Police and Criminal Evidence Act 1984. This includes but is not limited to: date and time of
seizure. Location seized. Officer seizing. A full continuity label for any officer taking
possession of the exhibit. Exhibit placed in a sealed, tamper proof bag.
II. Details of any technical or procedural methods used to record or track the CoC
and AT. Kindly specify if the process is automated, manual, or hybrid.
Once the exhibit is transferred into the possession of a DFU officer, our case management
system and Quality Management Systems record information such as:
• DFU storage location.
• Forensic workstation used to acquire the data from the exhibit.
• Software and version used to acquire the data from the exhibit. (Validated
software).
• Dependent upon the exhibit type and/or data required, the next steps could be
automated through MAGNET AUTOMATE or allocated to an investigator to
examine. Either steps are recorded in our CMS to detail the equipment (hardware)
and software used to conduct the examination.
III. Has your force conducted any internal evaluations or comparisons regarding
the efficiency, accuracy or reliability of automated, manual, or hybrid reporting
methods? If yes, please provide copies or references.
All processes are validated and tested independently by UKAS every year and internally
by our staff. Equipment and process validation checks are completed by our staff to
meet the Forensic Science Regulators codes and requirements under 17025 – laboratory
testing. This includes maintenance schedules and new equipment validation and testing
before authorisation to use in live casework.
IV. Please indicate whether any verification or validation procedures are in place
to confirm that digital evidence, upon acquisition, is a genuine and unmodified
record rather than a synthetically generated or manipulated.
All processes are validated and tested independently by UKAS every year and internally
by our staff. Equipment and process validation checks are completed by our staff to
meet the Forensic Science Regulators codes and requirements under 17025 – laboratory
testing. This includes maintenance schedules and new equipment validation and testing
before authorisation to use in live casework.
V. Any guidelines, practice directions, or policies guiding the documentation of
CoC and AT for digital evidence, including any templates or forms. Kindly
attach or reference related documents.
The information you are requesting is exempt by virtue of Section 21 of the Freedom of
Information Act 2000 – Information accessible to applicant by other means.
The following links will direct you to the relevant legislation:
Exhibits | The Crown Prosecution ServicePolice and Criminal Evidence Act 1984 (S.21)
Police and Criminal Evidence Act 1984 (S.22)
VI. Is the maintenance of a CoC and AT managed in-house or outsourced?
Police officers and Police staff are competent and trained in the seizure and handling of
evidence.
a. If in-house, provide details of the responsible role(s) or department(s), including
any training materials or internal guidance relevant to this task.
Police officers and Police staff in all operational roles are competent and trained in the
seizure and handling of evidence. Exhibit handling is a core role for policing and
embedded throughout induction training and ongoing CPD training in various courses,
competency reviews, accreditation requirements and evidence production.
Please reference the College of Policing for police officer training syllabus. Forensic staff
are trained as per the competency training documentation which is tested by ourselves
and UKAS. See attached at the end of this document.
b. If outsourced, please provide the name of the provider(s), a description of their
role, and any related contract document(s).
I am satisfied that all the relevant information has been passed to me and considered in the
light of your request within the time constraints applicable under the legislation.
Wiltshire Police would like to thank you for the interest that you have shown in the Force.
Yours sincerely
Force Disclosure Decision MakerPage 1 of 14
Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-25South-West Forensics
Data Forensic UnitExhibits
Standard Operating Procedure
DF-P-1Page 2 of 14
Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-25Contents
1 Purpose ...................................................................................................................... 4
1.1 Definitions .............................................................................................................. 4
2 Procedure ................................................................................................................... 5
2.1 Exhibit Receipt ........................................................................................................ 5
2.1.1 Exhibit Hazards and Warnings..................................................................................... 5
2.1.2 Booking Exhibits into DFU ........................................................................................... 6
2.1.3 Acceptance Issues ..................................................................................................... 7
2.1.4 Rejecting Exhibits ....................................................................................................... 8
2.1.5 Exhibit Tampering ....................................................................................................... 8
2.2 Exhibits under DFU Control ...................................................................................... 8
2.2.1 Exhibit Handling ......................................................................................................... 8
2.2.2 Continuity .................................................................................................................. 8
2.2.3 Digital Exhibit References ........................................................................................... 9
2.2.4 Labelling .................................................................................................................... 9
2.2.5 Movements ................................................................................................................ 9
2.2.6 Seals ......................................................................................................................... 9
2.2.7 Storage .................................................................................................................... 10
2.2.8 Sub-Exhibiting .......................................................................................................... 10
2.2.9 DFU Generated Exhibits ........................................................................................... 11
2.3 Exhibit Return ........................................................................................................ 11
2.3.1 Booking Exhibits Out of DFU ..................................................................................... 12
2.3.2 Exhibits Containing Illegal Material ........................................................................... 12
2.3.3 Additional Considerations ........................................................................................ 12
Page 3 of 14Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-252.4 Transferring Exhibits Outside of DFU ...................................................................... 13
2.4.1 SWF Laboratories (Internal) ...................................................................................... 13
2.4.2 External Agencies (External) ..................................................................................... 13
2.5 Disposal of Exhibits ............................................................................................... 14
2.6 Legal Professional Privilege ................................................................................... 14
2.7 Defence Examinations ........................................................................................... 14
3 Referenced Documentation ....................................................................................... 14Page 4 of 14
Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-251 Purpose
To define the procedure for the correct receipt and safe handling of exhibits to ensure
security, continuity, integrity, and storage within DFU.
1.1 Definitions
DFU Digital Forensics Unit
FSM Forensic Staff Member
SWF South West Forensics
OIC Officer in the Case
PPE Personal Protective Equipment
DNA Deoxyribonucleic acidPage 5 of 14
Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-252 Procedure
2.1 Exhibit Receipt
Prior to being received at DFU, exhibits are submitted on FORTRESS and assessed following
DF-P-3.0 Gatekeeping.
Once a submission has been accepted, exhibits shall be called to DFU. Any FSM can request
and/or collect exhibits from their local evidential property store.
Exhibits are received into the laboratory individually or in sealed transit bags/crates by the
following methods:
• Courier
• By hand
• Collected from Local Evidential Property Store
• Transfer from another SWF Department.
2.1.1 Exhibit Hazards and Warnings
Some exhibits may be submitted with potentially hazardous conditions present. Details of
the hazards should have been brought to the attention of the gatekeeper during the
submission process.
If the exhibit is known to have a biohazard (e.g. in a marked bag) and it is determined that
hazards have not been discussed at submission, the case will be placed on hold. The
exhibits shall be isolated and stored securely while the customer is contacted to discuss the
submission. Details of any discussions and decisions made will be recorded on FORTRESS.
The exhibit’s biohazard status shall be recorded on the “Biohazard” field of the relevant
exhibit.
All FSM’s have access to PPE which shall be used.
Potentially hazardous exhibits may include:
• Bio-Hazards
Exhibits contaminated with any bodily fluids such as blood, semen or faeces or any
other poor sanitisation risks.
Page 6 of 14Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-25• Chemical Hazards
Exhibits contaminated with/or have been near liquids such as acids, solvents or
flammable liquids or chemicals such as Anthrax, fertilisers, or illegal/hallucinogenic
substances
• Other Hazards
Exhibits subject to other personal risks such as broken and damaged components or
known electrical interference
• Preserve for Fingerprint
Gloves shall always be used when handling fingerprint preservation exhibits. If the
exhibit is required to be left unsealed (e.g. PIN decryption), the FSM shall protect the
exhibit with the exhibit bag and clearly identify the device as preserved for
fingerprints.
• Preserve for DNA
DFU is not configured for DNA preservation and DNA samples should be taken prior
to DFU examination. DF-P-1-Doc-8 Multi-Department Examination – Work
Instruction.
2.1.2 Booking Exhibits into DFU
On arrival to DFU, the receiving FSM shall check the exhibit against the following acceptance
criteria:
• The exhibit is in a sealed exhibit bag (or clear bag with an exhibit label) and the
packaging and seals are adequate to preserve integrity of the exhibit
• The exhibit continuity information is complete and legible with no conflicting
information
• The bag/exhibit label information matches what is recorded on FORTRESS including
exhibit number, seal number, property reference, exhibit description.
• Only one device is present in the bag. If an exhibit contains multiple devices, it is the
OIC’s responsibility to ensure they are separated and sub-exhibited accordingly prior
to receipt into the DFU store, unless exhibits are for initial triage.
• The exhibit and/or case has been accepted on FORTRESS.
Page 7 of 14Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-25• Duplicate exhibit references are not present on any other exhibits for the same case
• Biohazards, DNA and Fingerprint warnings are reflected on the physical exhibit and
FORTRESS where applicable
• If any additional safety concerns are identified e.g. blood, sharp pieces, this shall be
recorded on FORTRESS
For exhibits that pass the acceptance criteria check, the FSM shall complete the following
on FORTRESS:
• Update the exhibit “Movements” tab with the new location of the exhibit
If delivered directly to DFU, the FSM shall use the “Courier” field to record the time
and date of delivery as well as the details of the person delivering the exhibit
• Change the exhibit status to ‘Received’
• Where all accepted exhibits for a case are now received, change the case status to
‘Received’
2.1.3 Acceptance Issues
When reviewing the acceptance criteria (2.1.2 Booking Exhibits into DFU), discrepancies
between the physical exhibit and FORTRESS may be identified. In these situations, the
exhibit status shall be changed to “on hold” while awaiting corrective action from the
submitting officer.
The FSM shall contact the submitting officer and a record shall be made on FORTRESS.
Exhibits that are awaiting further information or corrective action cannot be allocated for
examination. Instead, they shall be placed in the relevant secure store.
Once the requested information or action has been completed, the FSM shall update the
status of the case from “On-Hold” and a note will be recorded on FORTRESS.
If the requested information or action has not been completed by the submitting officer
within 14 days of notification, the exhibit(s) may be returned as rejected (unless the reason
for the delay is agreed).
FSMs responsible for exhibits will regularly check those items placed on hold and progress
any that remain outstanding.
Page 8 of 14Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-25Where there is doubt regarding the discrepancies (e.g., where something is clearly a typo),
the FSM shall consult the Technical Manager to discuss rectification and justification to
continue with the examination. Details of any discussions shall be recorded on FORTRESS.
2.1.4 Rejecting Exhibits
Exhibits shall be rejected for not satisfying any of the points listed in the acceptance criteria
(2.1.1 Booking Exhibits in to DFU).
Rejected exhibits shall be returned following local policies and the procedures detailed in
(2.4.1 Booking Exhibits Out of DFU).
The FSM shall record the reasons for rejection on FORTRESS and inform the submitting
officer using the “rejected exhibit email template”.
Records of any communication shall be recorded on FORTRESS.
2.1.5 Exhibit Tampering
If there is any apparent evidence of tampering with an exhibit, it shall be recorded as a non-
conformance QMS-P-8 Non-Conformance and investigated. If the outcome of the
investigation indicates a deliberate attempt has been made to influence the results of the
examination, the provider’s top management shall be informed to decide the appropriate
escalation. This shall include notifying the Forensic Science Regulator.
2.2 Exhibits under DFU Control
2.2.1 Exhibit Handling
When handling any exhibit within DFU, all FSM’s shall wear the gloves provided.
2.2.2 Continuity
Any time an exhibit is to be removed from its sealed packaging; the FSM shall fill in the
exhibit continuity information on the bag/label.Page 9 of 14
Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-252.2.3 Digital Exhibit References
Within DFU, all records are stored digitally. This means that slashes (/) cannot be used in file
naming conventions. Once an exhibit is under DFU control, slashes shall be replaced with
dashes (-) for the purpose of digital referencing. Should an exhibit reference have no slashes
or dashes, it shall remain the same. For example:
• ABC/1 = ABC-1
• ABC02 = ABC02
2.2.4 Labelling
All exhibits under DFU control shall have a label attached to the packaging that displays the
case reference to always ensure unique identification.
When removing an exhibit from its packaging, the FSM shall attach a label displaying the
case and exhibit reference to always ensure unique identification.
2.2.5 Movements
When moving an exhibit, the FSM shall update the FORTRESS “Movements” tab for the
relevant exhibit to show the new location.
A check shall be made against FORTRESS to ensure the exhibit being moved is as described
on FORTRESS.
Should there be a major discrepancy between FORTRESS and the exhibit being handled
(e.g., FORTRESS says “computer” and the device is a phone) the FSM shall inform the
technical manager and if necessary, contact will be made with the submitting officer.
2.2.6 Seals
Exhibits shall always be resealed using tamperproof tape by the FSM conducting the
examination. The supplied tamperproof tape shall be uniquely referenced with a printed
serial number. The tape should also leave a tamper void mark if peeled off. Where the
tape/sticker does not completely seal the evidence bag, clear Sellotape shall be used, and
tamperproof tape placed over the top.
Page 10 of 14Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-25If tamper proof tape is unavailable, brown box tape shall be used to seal the evidence bag.
The FSM will write the date, their signature and collar number across the brown tape
ensuring it overlaps both the brown tape and evidence bag. Where the above tamperproof
tape method be unsuitable, zip tie seals shall be used ensuring they are printed/labelled
with unique seal numbers. Previous seals/tape/tags/evidence bags shall be placed into the
existing evidence bag and not disposed of. Details of new seal numbers shall be updated on
FORTRESS – where brown tape is used, the FSM collar number will be the seal.
2.2.7 Storage
Exhibits received into DFU shall be stored within a secure store or within the laboratory
itself. Under no circumstances shall exhibits be left unattended in an insecure area. Exhibits
that are not actively being examined shall be stored in a secure store.
Whilst in the exhibit store, exhibits shall remain in sealed bags and will be assigned to exhibit
bays.
In the event of an FSM having planned absence, it will be their responsibility to ensure that
the exhibit is either reallocated to another FSM or stored away securely until their return.
Should the absence be unplanned (e.g. sickness) it will be the responsibility of the relevant
Technical Manager to ensure that the submission is dealt with appropriately.
If information is received to say that the examination is no longer required, the Technical
Manager shall be informed. Arrangements will be made for the exhibit to be returned as
appropriate, and FORTRESS updated to show the “Exhibit Status” field as “Completed”.
2.2.8 Sub-Exhibiting
Any FSM within DFU shall not create sub-exhibits. If an FSM identifies an exhibit that
contains other items (e.g. money, credit cards) or devices that require exhibiting, they shall
contact the OIC to attend the DFU who will be responsible for separating the devices into
separate exhibits. Details of any newly created exhibits requiring a digital examination shall
be updated on the relevant case on FORTRESS to reflect any changes. If the FSM is unsure
whether an item requires exhibiting, they shall consult the Technical Manager.
Page 11 of 14Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-25There is an exception for multiple data bearing components. When a single exhibit contains
multiple data-bearing components (e.g., a computer with multiple hard drives or USB
sticks), the examiner shall sub-reference these components.
2.2.9 DFU Generated Exhibits
Where an FSM creates a physical exhibit within DFU (e.g., a USB containing examination
reports), it shall be securely stored in a sealed exhibit bag. The FSM shall fill in the exhibit
continuity information on the bag/label to include the following information as a minimum:
• A unique exhibit reference to include the initials of the recovering FSM and a
sequential number.
• A date of production
• A description including the original exhibit reference of the item the data came from
The FSM shall create a record on the local force property tracking system where applicable.
A digital copy must still be retained on the DFU server with the rest of the case data.
DFU generated physical exhibits shall be issued to the OIC by following the steps in 2.3
Exhibit Return.
2.3 Exhibit Return
At the conclusion of the DFU examination, exhibits shall be resealed, and any new seal
numbers recorded on FORTRESS.
The exhibit(s) will either:
• Be placed into the secure store awaiting collection at the conclusion of the case
• Returned to the Local Evidential Property Store
Submitted biohazard Items/exhibits shall be packaged and clearly marked with biohazard
tape.
The FSM dealing with the return/collection shall update the “Movements” tab on FORTRESS.
Exhibits collected from DFU shall have the Authorisation field signed. The Force’s Property
Management System/NICHE shall also be updated where applicable.
Page 12 of 14Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-252.3.1 Booking Exhibits Out of DFU
Before releasing an exhibit from DFU control, the FSM shall:
• Ensure the exhibit bag has been correctly resealed, and the seal number has been
correctly entered onto FORTRESS.
• Ensure the exhibit and case statuses have been appropriately updated
• Update the “Movements” tab with the new location of the exhibit.
If collected directly from DFU, the FSM shall use the “Courier” field to record the time
and date of collection as well as the details of the person collecting the exhibit
Any continuity or administration issues shall be referred to the FSM responsible for the
physical examination to rectify.
2.3.2 Exhibits Containing Illegal Material
Exhibits that contain or are suspected to contain indecent/extreme/prohibited material
must be clearly marked.
Exhibits shall be marked by attaching the following labels:
• May Contain Illegal Material Label: DF-P-1-LABEL-1
Indicating that the exhibit may contain Illegal Material. This is used often when an
exhibit could not be examined fully however the intelligence on the FORTRESS
submission alluded to the presence of illegal material.• Contains Illegal Material DF-P-1-LABEL-2
Indicating that the presence of Illegal Material has been confirmed and the device
cannot be returned to the owner.
The FSM completing the examination shall ensure details are recorded on FORTRESS by
changing the exhibit status to reflect the content. The responsibility remains with the OIC to
ensure items containing illegal material are not returned and disposed of.
2.3.3 Additional Considerations
The following considerations will always apply when returning exhibits:
Page 13 of 14Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-25• The presence of bodily fluids on the exhibit may cause distress to family members on
return. The OIC shall be informed so that they can arrange for fluids to be removed
prior to return.
• Where files that may cause distress to family members have been located, this shall
be brought to the attention of the OIC. DFU can “selective wipe” the files prior to
return at the conclusion of a case. This is not standard practice and must be
requested by the OIC.
• Any mobile devices that have been subject to destructive processes (e.g., repair,
eMMC), shall have a “Do Not Return” label attached. While they may appear to
function correctly, the process may have introduced additional risks (e.g,
overheating).
2.4 Transferring Exhibits Outside of DFU
2.4.1 SWF Laboratories (Internal)
Cases may be transferred between any of the laboratories within South-West Forensics.
Details of the transferred exhibits shall be sent electronically prior to sending. These details
shall be checked against the submitted items by the receiving laboratory prior to receipt.
See QMS-P-5 Subcontracting for details regarding Internal SWF Laboratories.
In cases where multiple department examinations are required (i.e. Fingerprints/DNA) the
procedure set out in DF-P-1-Doc-8 Multi-Department Examination – Work Instruction
shall be followed.
2.4.2 External Agencies (External)
Cases may be submitted by any of the data forensic units to an external agency to complete
examinations on behalf of SWF.
Where there is a requirement to submit electronic images, these shall be placed on a clean,
wiped and encrypted HDD and placed in a bag or box and sealed.
Details of the transferred exhibits shall be sent electronically prior to sending.
See QMS-P-5 Subcontracting for details regarding External Agencies.
Page 14 of 14Document Reference: DF-P-1 Issue 25
Uncontrolled if copied or printed Issue Date: 01/05/25 Authorised By:
Change Request Number: 108-252.5 Disposal of Exhibits
Where exhibits are to be disposed/destroyed by DFU DF-P-1-Doc-11 Destruction Work
Instruction shall be followed.
2.6 Legal Professional Privilege
Where an exhibit or extracted data is subject to Legal Professional Privilege, DF-P-1-Doc-9
Legal Professional Privilege shall be followed.
2.7 Defence Examinations
Where an exhibit or extracted data is to be reviewed by the defence, DF-P-1-Doc-10
Defence Examinations shall be followed.3 Referenced Documentation
DF-P-3.0 Gatekeeping
QMS-P-8 Non-Conformance
DF-P-1-LABEL-1 May Contain Illegal Material Label:
DF-P-1-LABEL-2 Contains Illegal Material
QMS-P-5 Subcontracting
DF-P-1-Doc-11 Destruction Work Instruction
DF-P-1-Doc-6 DFU Folder Structure and File Naming – Work Instruction
DF-P-1-Doc-7 Data Handling and OIC Review – Work Instruction
DF-P-1-Doc-8 Multi Department Examination – Work Instruction
DF-P-1-Doc-9 Legal Professional Privilege – Work Instruction
DF-P-1-Doc-10 Defence Examinations – Work Instruction
© Wiltshire Police. Reproduced for non-commercial purposes from https://www.wiltshire.police.uk/SysSiteAssets/foi-media/wiltshire/2025/11-november-2025/foi-2025-1113_digital-evidence.pdf under Wiltshire Police's publication scheme terms, which allow free reproduction if accurate and not misleading, with the source and copyright acknowledged. The text only, as read from the published documents; material owned by others is not covered. Collected on 2 September 2026; Wiltshire Police may have changed or withdrawn it since.
If this text names you or you own part of it, ask us to take the full text down: it is hidden as soon as you send the form, and the title and summary stay.
Related releases
- FOI 2026-799-Online child sexual exploitation offences and paedophile hunter groups Disclosure log response · Wiltshire Police · 22 Sept 2026
- Internal-Review-FOI-2026-615_Racial_Discrimination Disclosure log response · Wiltshire Police · 22 Sept 2026
- FOI 2026-758_Notices of intended prosecution Disclosure log response · Wiltshire Police · 21 Sept 2026
- FOI-2026-810-policy requiring attendance at every death Disclosure log response · Wiltshire Police · 21 Sept 2026
- FOI 2026-817_Burglaries and domestic incidents at Christmas Disclosure log response · Wiltshire Police · 21 Sept 2026
Ask us to remove a name from this page (free) · Report a mistake