FOI 22865 3D PrintersDisclosure log response · Staffordshire Police
FOI 22865 3D Printers
Read it at Staffordshire Police's website
- Published
- 28 May 2026
- Published by
- Staffordshire Police
- Outcome
- Refused
- Exemption
- Section 12 Cost limit: finding the information would cost more than the limit (£450 for the police)
- Source
- Staffordshire Police's website
- Recorded by PoliceFOI
- 2 Sept 2026
We read the outcome and the exemption automatically from the response's own words, so this can be wrong: report a mistake. What the outcomes and codes mean.
In full, as Staffordshire Police published it
We show a record in full only where its publisher's terms allow it. Most police forces in England and Wales publish under the same publication scheme terms: anyone may reproduce a force's own material free of charge if it is accurate and not misleading and the source and copyright are acknowledged, but not for any commercial purpose. PoliceFOI is published by a company, so we treat our use as commercial, and for those forces we show each record's title and summary, with a link to the original, until the force agrees to more. A few forces' terms are stricter still. None of these terms covers material owned by someone else, or a force's logo, so we link to such material rather than copy it.
Files
- File PDF, 192 KB
The original
The text of this file
27 May 2026 FOI Ref 22865
Request - You asked Staffordshire Police (SP) the following:
− How many cases have involved 3D printers in each of the last 4 years?
− How many of these led to a conviction?
− How many instances of 3D printers being used to create illegal weapons, or parts for illegal
weapons, have been investigated in each of the last 4 years?− How many of these led to a conviction?
SP received your request on 11/05/2026 and have processed this under the Freedom of Information Act
(FOIA).SP’s response to your enquiry is as follows:
In accordance with Section 17(1) of the Freedom of Information Act, this letter represents a refusal notice
for this request.The following exemption has been applied:
• Section 12(1) where the cost of compliance exceeds the appropriate limit.
Section 12(1) does not oblige a public authority to comply with a request for information if the authority
estimates that the cost of complying with the request would exceed the prescribed limit’.The above information has been withheld for the following reasons:
There is no method by which SP can readily retrieve information from our crime recording systems to
answer this request. Within our crime recording database there is no specific field or flag applied in which
the use of a 3D printer would be routinely recorded. This level of detail would be recorded in any number
of free text fields across the whole crime report. For the time period requested, there have been in excess
of 300,000 recorded offences that would need to be manually searched to establish whether a 3D printer
was involved. In relation to the question regarding 3D printers being used to create illegal weapons, there
are more than 130,000 offences in the H.O. categories of violence and possession of weapons that would
again need to be manually searched. To extract this data would therefore require a very labour-intensive
manual trawl through each record and all associated crime reports.From dip sampling, it has been estimated that it would take approximately 5 minutes to review each record
to answer this request, this would equate to a minimum of 25,000 hours. To achieve this task would
therefore exceed the 18-hour time and cost threshold of the Freedom of Information Act by a considerable
margin.Advice and assistance
Section 16 of the Act places an obligation upon the Authority to provide advice and assistance, to comply
with this obligation please see below.Unfortunately, SP cannot suggest a way in which your request could be simplified or pared down to bring
it within the confines of the time and cost threshold.Please find the below link to some of the information requested.
Man who made guns using 3D printer jailed for more than 10 years | Staffordshire PolicePlease be advised that all F reedom of Information request responses are published on the SP website
although personal details are not included.Freedom of Information Request Appeals Procedure
1. Who Can Ask for a Review
Any person who has requested information from SP, which has been dealt with under the Freedom of
Information Act, is entitled to complain and request an internal review, if they are dissatisfied with the
response they received.2. How to Request a Review
Requests for review of a Freedom of Information request must be made in writing within two months of the
date of receipt of this email, and should be addressed to:[removed by PoliceFOI]
Or by Post to:
Information Access Team
Staffordshire Police HQ
PO Box 3167
Stafford
ST16 9JZThe reference number, date of the request and details of why the review is being requested must be
included. Requests for review should be brought to the attention of the Information Access Team within
two months of the Force’s response to the original FOI request.3. Review Procedure
Receipt of a request for review will be acknowledged in writing. The review will be conducted by a
supervisor who is independent from the original Decision Maker. The Information Access Team will set a
target date for a response. The response will be made as soon as is practicable with the intention to
complete the review within 20 working days. In more complex cases the review may take up to 40 working
days.The independent Supervisor will conduct a review of the handling of the request for information and of
decisions taken, including decisions taken about where the public interest lies in respect of exempt
information where applicable. The review enables a r e-evaluation of the case, considering the matters
raised by the complaint.4. Conclusion of the Appeal
On completion of the review the Independent Supervisor will reply to the appellant with the result of the
review. If the appellant is still dissatisfied following the review they should contact the Information
Commissioner to make an appeal. The Information Commissioner can be contacted via the following link:
https://ico.org.uk/make-a-complaint/foi-and-eir-complaints/foi-and-eir-complaints/Freedom of Information
Information Access Team
© Staffordshire Police. Reproduced for non-commercial purposes from https://www.staffordshire.police.uk/SysSiteAssets/foi-media/staffordshire/2026-published-foi-requests/may/foi-22865-3d-printers.pdf under Staffordshire Police's publication scheme terms, which allow free reproduction if accurate and not misleading, with the source and copyright acknowledged. The text only, as read from the published documents; material owned by others is not covered. Collected on 2 September 2026; Staffordshire Police may have changed or withdrawn it since.
If this text names you or you own part of it, ask us to take the full text down: it is hidden as soon as you send the form, and the title and summary stay.
Related releases
- Accelerated misconduct hearing for PC Alex Potts Misconduct hearing notice · Staffordshire Police · 21 Sept 2026
- FOI 23366 Shotgun Certificates Disclosure log response · Staffordshire Police · 21 Sept 2026
- FOI 23389 Published News Content Disclosure log response · Staffordshire Police · 21 Sept 2026
- FOI 23393 Speed Camera Van Disclosure log response · Staffordshire Police · 21 Sept 2026
- FOI 23396 Sickness Levels Disclosure log response · Staffordshire Police · 21 Sept 2026
Ask us to remove a name from this page (free) · Report a mistake